![16TYT8-1 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
Allicdata Part #: | 1144-1353-ND |
Manufacturer Part#: |
16TYT8-1 |
Price: | $ 77.08 |
Product Category: | Filters |
Manufacturer: | Delta Electronics |
Short Description: | LINE FILTER 520VAC CHASSIS MOUNT |
More Detail: | N/A |
DataSheet: | ![]() |
Quantity: | 1000 |
4 +: | $ 70.08330 |
Series: | TYT |
Part Status: | Active |
Filter Type: | Three Phase (Wye) |
Configuration: | Single Stage |
Voltage - Rated DC: | -- |
Voltage - Rated AC: | 520V |
Frequency - Operating: | 50/60Hz |
Applications: | General Purpose |
Approvals: | UR |
Operating Temperature: | -- |
Mounting Type: | Chassis Mount |
Termination Style: | Terminal Block |
Inductance: | 1.7mH |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power line filter modules are used in many types of electronic products and equipment for the purpose of filtering electromagnetic interference and to reduce the amount of conducted EMI radiation from the product or system. The 16TYT8-1 power line filter module is a three-phase, four-wire, galvanic isolate, low-pass filter. The module has three independent EMI filters, one for each phase, as well as a return line. The filter design is based on an EMI/RFI filter design known as the PI-type.
This type of filter works on the principle of impedance matching, which means that the filter is designed to match the impedance of the line, so that most of the EMI/RFI signals are absorbed within the filter, thus reducing the levels of EMI/RFI radiation. The frequency response of the filter is such that it will attenuate signals between 10 kHz and 2 MHz. This filter is designed to achieve the RFI levels set by the standards EN 61000-6-3 and EN 61000-6-4. it also meets the harmonic requirement of EN 61000-3-2 and EN 61000-3-3.
The 16TYT8-1 power line filter module can be used in a variety of applications including, but not limited to, industrial and residential, motor drives, lighting products, and power supplies. It is a useful device for reducing the amount of conducted EMI interference in various consumer electronic products, such as televisions and computers. It can also be used to reduce interference with other radio systems, such as cellular and Wi-Fi systems.
The module is designed for power line applications that require a reliable and efficient EMI filter solution. The PI-type filters provide low insertion loss, low source impedance, and broad frequency attenuation. The filter can be used to reduce the amount of conducted EMI/RFI radiation, as well as providing a high efficiency power line filtering solution. The 16TYT8-1 power line filter module is an ideal choice for industrial and residential applications that require a reliable and efficient power line filtering solution.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
![20EB11 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
LINE FILTER 125/250VAC 4A TH
![5500.2133 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
LINE FILTER 500VAC 100A CHASSIS
![FTA-100-104-H Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
LINE FILTER 480VAC 50A CHASS MNT
![F3480T050 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
LINE FILTER 480/520VAC 36A CHASS
![FMAC-0934-3610 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
LINE FILTER 480VAC 65A CHASS MNT
![FMBC-0997-6500 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)