172-037-181-021

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

D-Sub connectors are widely used in electronic engineering applications, from computers to consumer electronics. The 172-037-181-021 is a type of D-Sub connector. It is used in a variety of applications, including data transfer, signal switching and interconnectivity. Knowing the applications and working principles of the 172-037-181-021 is important for those wanting to install or work with this type of connector.The 172-037-181-021 is a D-Sub connector primarily used for data transfer and signal switching. It is typically used to connect two pieces of electronic equipment, such as a computer and printer, to allow for data communication. This connector has a 25-pin configuration, divided into two rows of 12 and 13 pins. It also has four mounting screws and a dustcap.The 172-037-181-021 is designed for use with a flat ribbon cable. This type of cable consists of multiple insulated wires encased in a flat, flexible material, allowing it to more easily bend around corners or fit into tight spaces. The wires in the cable connect to the pins on the connector, establishing a data connection between the two electronic components.In order to establish the connection between the two pieces of electronic equipment, the 172-037-181-021 uses a particular protocol. This protocol requires that the connector and the corresponding flat ribbon cable have the correct pin configuration and the same signal type. The signal type for the 172-037-181-021 is usually a male-to-male serial data connection, which enables data to be transmitted and received. If either the pin configuration or the signal type is incorrect, the connection between the two pieces of equipment cannot be established.In addition to its use in data transfer and signal switching, the 172-037-181-021 is also used to provide interconnectivity between pieces of equipment. This is done by connecting each pin on the connector to its corresponding pin on the flat ribbon cable, allowing for a continuous connection between the two devices. This type of connection is used in computer networking, where multiple devices are conjoined into one continuous network.When working with the 172-037-181-021, it is important to keep in mind the applications it is designed for. If the connector and flat ribbon cable have the correct pin configuration and signal type, the connection between the two pieces of equipment should be properly established. Additionally, if the connector is used for interconnectivity, it should be connected correctly to ensure that each pin is connected to its corresponding pin on the cable. Following these steps will ensure that the connector is properly installed and functioning.The 172-037-181-021 is an important part of electronic engineering, enabling data transfer, signal switching, and interconnectivity between two pieces of equipment. By understanding the applications and working principles of the connector, those working with it can ensure that it is properly installed and functioning.

The specific data is subject to PDF, and the above content is for reference