1720075

Mounting Type:	Through Hole
Screw Thread:	M3
Torque - Screw:	0.5-0.6 Nm (4.4-5.3 Lb-In)
Screw Material - Plating:	--
Clamp Material - Plating:	--
Contact Material - Plating:	--
Housing Material:	--
Operating Temperature:	--
Color:	Black
Features:	Interlocking (Side)
Wire Termination:	Screw - Rising Cage Clamp
Series:	COMBICON SMKDS
Wire Gauge:	10-30 AWG
Voltage:	300V
Current:	30A
Mating Orientation:	35° (145°) Angle with Board
Pitch:	0.375" (9.53mm)
Positions Per Level:	2
Number of Levels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks – wire to board are a particular type of electrical connectors used in the industrial and commercial world. These connectors allow easy and secure connections of wires to other wiring devices, or to a printed circuit board. This type of connectors come in various shapes and sizes and are used in a wide range of application fields and have a variety of working principles.The most common type of terminal blocks use screws to fasten the wire to the block; the connection is very secure due to the torque created. This type of connection is suitable for larger wires and is mostly used in industrial applications where robust and permanent wiring is needed. The wires can be connected to the printed circuit board mechanically or optically, in a matter of just a few minutes.Other types of terminal blocks use an insulation-displacement contact (IDC) to connect the wire to the block. In this type of connector, the wires are pushed into slots on the block, and contact is made with the two connecting points. This type of connection is suitable for small, delicate wires, and is very cost effective as well. The connection time for this type of connector is much shorter compared to screws-based connection.The third type of terminal blocks use various kinds of “spring” connections, such as Single-wire Spring Terminal (or SST) or Multi-wire Spring Terminal (MST). These terminals have a spring-loaded metal contact that holds the wires securely, and this type of connection is most commonly used for automotive applications. The connection time for these types of connectors is very short, and they provide secure and permanent wiring.Terminal blocks – wire to board are used in various applications, from industrial to residential settings. In industrial applications, they are used for connecting motors, sensors, relays, transistors, and other electrical components to the printed circuit board. In residential settings, they are most commonly used to connect switches, outlets, wires, and other electrical components, either to the printed circuit board or directly to the wall.Regardless of the type of connector used, all terminal blocks – wire to board are designed to provide a secure and reliable connection between two points, without increasing the cost of the installation. When the proper type of terminal block is selected, the wiring is safe and secure, and the connection time is kept to a minimum. This is an important factor in today’s high-tech and fast-paced environment.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description