173D396X9010XW

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are a type of passive electronic component. They are widely applied in areas such as consumer electronics, automobiles, military, aerospace, and other industries. The most common form of Tantalum capacitor is the solid electrolytic capacitor, where a solid Tantalum oxide anode is anode is anodized with a dielectric layer of Tantalum pentoxide, with a manganese dioxide electrolyte that forms a negatively charged cathode. The 173D396X9010XW is a solid electrolytic capacitor from the family of Tantalum capacitors. It has an overall size of 1.5x3.6x9.0 millimeters and a nominal capacitance of 10 microfarads.

The 173D396X9010XW is a polarized capacitor, which means that it must be connected with the correct polarity for proper operation. The positive terminal of the capacitor must be connected to the positive side of the circuit, and the negative terminal must be connected to the negative side of the circuit. Failure to do so will result in the capacitor not working, or becoming damaged. The capacitor also has a polarity mark on its case to indicate the correct orientation. The capacitor also has a rated voltage value, which must not be exceeded during use or the capacitor may become damaged.

The operating principle of the 173D396X9010XW is the same for all other Tantalum capacitors. This capacitor can store energy and transfer it from one voltage level to another, and can also reduce ripple noise in electronic circuits such as those found in PCs and smartphones. The capacitor works by using an electrolyte to transfer electrical charge between the anode and the cathode. The anode is positively charged, and the cathode is negatively charged. This causes a potential difference between the two terminals, which allows charge to flow between them. As the capacitor is charged and discharged, the charge is stored in the form of an electric field between the two terminals.

The 173D396X9010XW is most commonly used in applications such as decoupling circuits which remove line noise, filter circuits that reduce unwanted signal noise, and smoothing circuits that reduce variations in power supply voltage to improve the performance of sensitive electronic components. It is also used in many other applications such as power supplies, audio amplifiers, and instrumentation. Tantalum capacitors generally have lower internal resistance than other types of capacitors and can also operate at higher frequencies and temperatures.

In summary, the 173D396X9010XW is a solid electrolytic capacitor that belongs to the family of Tantalum capacitors. It is a polarized capacitor with an overall size of 1.5x3.6x9.0 millimeters and a nominal capacitance of 10 microfarads. It is used in many applications, such as decoupling circuits, filter circuits, smoothing circuits, and power supplies, due to its low internal resistance and ability to operate at higher frequencies and temperatures.

The specific data is subject to PDF, and the above content is for reference