173D475X9006UE3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are a type of electrolytic capacitor that today is mostly seen in electronic devices. They are a small component, typically made of a tantalum pellet surrounded by two electrodes. The tantalum pellet is then covered with a dielectric oxide film, while the two electrodes serve as the two plates of the capacitor. In its simplest form, a tantalum capacitor is just a piece of wire with an oxide on it. This oxide can either be in the form of an anode or a cathode, depending on the type of capacitor.

173D475X9006UE3 is a popular model of tantalum capacitor. It is a high-density surface-mount capacitor with a high volumetric efficiency that provides an ideal solution for power systems that require high capacitance values in a small form factor. The component is lead free, meets RoHS requirements and has a capacitance value ranging from 47 to 470 μF. It also has a maximum working voltage of 16 VDC.

The capacitance of the 173D475X9006UE3 is achieved by using a tantalum pellet covered in an oxide film. This film serves as the dielectric between the two plates of the capacitor, allowing for a larger surface area, thus more room for the oxide to store and release energy. When the capacitor is put under a voltage, the oxide film stores the charge and releases it slowly when needed, allowing the capacitor to maintain its capacitance for a longer period of time.

The application field of the 173D475X9006UE3 is broad, ranging from automotive and medical uses to consumer electronics, computers and telecommunications. It is often used in power supplies that require a high capacitance value in order to smooth out voltage spikes and maintain a consistent output. It is also used in filtering circuits to reduce the effect of noise on input signals. Tantalum capacitors are also very popular in timer circuits, as they can be used to hold a charge for a long period of time without the need to be constantly replenished.

The working principle of the 173D475X9006UE3 also follows the same principles of a typical tantalum capacitor. The voltage applied across the two electrodes causes a reaction between the tantalum pellet and the oxide film, creating a capacitance of 47 to 470 μF. This capacitance is then used to store and release energy, allowing for lower voltage drops and a consistent output.

Overall, the 173D475X9006UE3 is a highly efficient and reliable tantalum capacitor that is widely used in a variety of applications. Its wide capacitance range, high volumetric efficiency and lead free characteristics make it an ideal choice for many power systems requiring a high capacitance value in a small form factor.

The specific data is subject to PDF, and the above content is for reference