1786440000

Mounting Type:	Through Hole
Screw Thread:	M3
Torque - Screw:	0.5-0.6 Nm (4.4-5.3 Lb-In)
Screw Material - Plating:	--
Clamp Material - Plating:	--
Contact Material - Plating:	Electrolytic Copper - Tin Plated
Housing Material:	Polyamide (PA), Nylon
Operating Temperature:	-50°C ~ 100°C
Color:	Orange
Features:	--
Wire Termination:	Screw - TOP Clamp
Series:	TOP4GS
Wire Gauge:	10-26 AWG
Voltage:	300V
Current:	30A
Mating Orientation:	Horizontal with Board
Pitch:	0.300" (7.62mm)
Positions Per Level:	10
Number of Levels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

1786440000 Terminal Block - Wire to Board is a type of electrical component used to connect two or more conductors in a circuit. This type of terminal block usually connects cables that have been stripped and equipped with crimped spade, ring, or fork terminals. It is usually used to link power sources together in industrial and commercial settings.

Application fields and overview

1786440000 Terminal Block - Wire to Board can be used for connecting electrical wiring to outlets, switches, and lighting installations. They can be applied to lighting systems, PCB assemblies, and other electrical systems. It is also commonly used in process control equipment, automation systems, HVAC, instrumentation, power systems, and various computer systems.Terminal blocks can also be used to connect various types of cable and wire. Depending on the application, they can come in a range of sizes and shapes. The most common terminal block is the M6 terminal block, which is typically used in applications where a large number of conductors need to be connected. This type of terminal block is often used in the industrial sector.

Working Principle

The most common type of terminal block is the M6 terminal block, which is a six-conductor terminal block. These terminal blocks have a simple design: two conductive rods extend out of the base of the block and into two channels that contain a number of crimped and soldered spade lugs. When a conductor is inserted into the block, a small tab on the back of the lug grips onto the conductor to securely hold it in place, completing the connection.For some applications, including off-board wiring, a different type of wiring terminal block is required. These terminals are powered by a slot, which is a long gap in the block, marked by a flat area on either side. To make a connection, the conductor is placed through the slot and the terminal block is pushed onto the other side of the slot. This causes the conductor to be pressed against the terminal and securely held in place.

Conclusion

1786440000 Terminal Block - Wire to Board is an essential component for any electrical system, offering a reliable and secure connection between two or more conductors. Not only does it provide a safe connection, but the terminals also come in a variety of shapes and sizes to suit the specific requirements of the application. Connecting the cables and wires securely with this type of terminal block is a simple and effective way to ensure a proper connection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description