1791110000

Voltage - IEC:	500V
Stripping Length:	10mm
Material Flammability Rating:	UL94 V-0
Material - Insulation:	Thermoplastic, Wemid
Fuse Type:	--
Color:	Blue
Features:	--
Wire Gauge or Range - mm²:	0.5-1.5mm²
Wire Gauge or Range - AWG:	16-28 AWG
Voltage - UL:	300V
Current - UL:	10A
Series:	Z
Current - IEC:	17.5A
Termination Style:	Push In, Spring
Terminal - Width:	3.5mm
Number of Levels:	2
Number of Positions:	4
Disconnect Type:	--
Type:	Feed Through
Lead Free Status / RoHS Status:	--
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Terminal blocks are one of the most important components used in electrical systems. They are used to connect two or more electrical devices such as wires, terminals, and other connected components. Terminal blocks can be classified into three categories, which are Din Rail terminal blocks, channel terminal blocks, and spring clamp terminal blocks. These all provide a secure connection between two or more wires and can also be used to provide a break between networks and circuits for equipment maintenance and other reasons.

Din Rail Terminal Blocks

Din rail, or also known as top-hat rail, is a type of terminal block primarily used in industrial applications. These blocks are mounted parallel to the DIN standard on a support rail or DIN rail, hence the name Din rail. The Din rail is typically mounted parallel to a flat surface using screws and other mounting hardware.Din rail terminal blocks have a broad range of applications which includes connecting sensors to temperature controllers, distribution boards to motors, and connecting lights to switches. In general, Din rail terminals are commonly used in industrial automation, process control, and general automation systems.Din rail terminals are designed with two basic components: the body and the terminal. The body typically has a spring mechanism along with a screw terminal connection which is used to secure the electrical connection. The terminal side has a connector terminal that is used to make and break the connection. The connection is secured by the screw terminal with a locking screw designed to ensure the connection is secure and can not be tampered with.

Channel Terminal Blocks

Channel terminal blocks are a type of terminal block typically used in residential and commercial applications. These blocks are typically installed in a wall or under a floor for connecting appliances, such as lights, to switches.The major components of a channel terminal block include a receptacle, a base, and a channeled connector. The receptacle is typically mounted in the wall and the base is designed to hold the channeled connector. The channeled connector consists of two pieces, the terminal and the wire. The terminal is then connected to the appliance and the wire is connected to the switch.Channel terminal blocks are usually designed for single-phase power, however, they can also be used to accommodate three-phase power. This type of terminal block is easy to install and is generally less prone to failure. Additionally, this terminal block also allows for easy wiring connections and is often preferred over other types of terminal blocks.

Spring Clamp Terminal Blocks

Spring clamp terminal blocks are a type of terminal block primarily used in commercial and industrial applications. They are typically used in electronic systems for connecting components to power and signal lines.The spring clamp terminal blocks consist of two parts, a terminal block and a spring clamp. The terminal blocks are typically plastic or metal blocks with a set of contact points, known as terminals. The spring clamp is used to secure one or more wires to the terminals. The spring clamp is usually held in place using a thumbscrew, however, some spring clamps are designed with a ratchet mechanism which allows the wire to be tightened or released with a simple twist.These terminal blocks are commonly used in a wide range of electronic systems, including industrial control systems, home automation systems, and industrial process control systems. The spring clamp terminal blocks provide a secure connection and allow for easy wiring connections.

Conclusion

Terminal blocks are a vital component within electrical systems; they provide a secure connection between two or more wires and make the process of wiring connections easy. There are three main types of terminal blocks available, Din rail terminal blocks, channel terminal blocks, and spring clamp terminal blocks. Each of these has its own specific uses and advantages, depending on the application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description