18113150001

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses

When an electrical circuit is designed or constructed, an intrinsic safety feature is the addition of an electrical protection device. One such device is an 18113150001 Fuse, a device designed and used in electrical circuits to protect against overloads and short circuits. In this article, the application field and working principle of an 18113150001 Fuse will be discussed.

Application Field

18113150001 Fuses are commonly found in consumer products and equipment and are designed to protect against overloads and short circuits, as this type of fuse is designed to open the circuit in the event of an overload. This type of protection is similar to the protection that other types of circuit breakers provide, but is specially designed to limit the amount of current that can pass through. The 18113150001 Fuse can be used in a variety of applications, including industrial equipment, consumer electronics, and home wiring systems. It is important to ensure that the fuse installed in the electrical circuit is rated for the current that may pass through and is of proper size and type to safely handle the load.

Working Principle

The 18113150001 Fuse is designed to open the circuit in the event of an overload or short circuit. It consists of a thin piece of metal, typically a copper strip or a copper wire, which is then welded to two metal strips at either end. The two metal strips are then connected to the terminals of the fuse. When the current passing through the fuse is higher than the specified rating of the fuse, the metal strip inside the fuse will heat up, increasing its resistance. This will cause the metal strip to break, thus cutting off the current. This threshold is known as the melting point of the fuse.

The 18113150001 Fuse is designed to open the circuit as soon as the current exceeds the maximum specified rating. This ensures that the circuit is not overloaded and the connected electrical appliance is protected. Once the fuse is open, it must be replaced, as it cannot be reset.

The 18113150001 Fuse is an important device in any electrical system, as it is designed to protect the circuit and all of the connected appliances from overloads and short circuits. It is important to correctly install a fuse of sufficient rating to provide adequate protection. It is also important to regularly inspect the fuse and replace it if necessary.

The specific data is subject to PDF, and the above content is for reference