Allicdata Part #: | 277-10371-ND |
Manufacturer Part#: |
1821067 |
Price: | $ 15.93 |
Product Category: | Connectors, Interconnects |
Manufacturer: | Phoenix Contact |
Short Description: | TERM BLK PUSH IN CLMP 3P GRANITE |
More Detail: | 3 Position Terminal Block Push In Clamp - Wire Ent... |
DataSheet: | 1821067 Datasheet/PDF |
Quantity: | 26 |
1 +: | $ 14.48370 |
10 +: | $ 14.08870 |
50 +: | $ 13.16700 |
100 +: | $ 12.11360 |
250 +: | $ 11.19200 |
500 +: | $ 10.66530 |
Series: | CLIPLINE PLW |
Part Status: | Active |
Front Panel Wire Connection: | Push In Clamp - Wire Entry Angled to Panel |
Rear Panel Wire Connection: | Push In Clamp - Wire Entry 90° to Panel |
Width: | 2.142" (54.40mm) |
Panel Thickness: | 0.758" (19.26mm) |
Positions Per Level: | 3 |
Panel Mount Type: | 2 Piece |
Pitch: | 0.394" (10.00mm) |
Voltage - UL: | 500V |
Current - UL: | 40A |
Wire Gauge: | 6-16 AWG |
Color: | Granite |
Features: | Lever Actuated |
Number of Levels: | 1 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Terminal Blocks - Panel Mount applications and working principles are common in electronic and electrical systems. Terminal blocks are substation components used for connecting wires to electrical sources or equipment. They provide an easy method for connecting and disconnecting wires that are located in the same vicinity. There are two types of wiring systems, hard-wired and plug-connected. Hard-wired systems involve soldering wires to the terminals of the components. Plug-connected systems involve connecting the terminals of the components using plug-and-socket connectors.
Panel mount terminal blocks are designed for use in electrical panels or cabinets. They are commonly used as link terminals, distribution terminals, fuse holders and control switches. Panel mount terminal blocks require a substantial electrical enclosure due to their higher current capabilities than other types of terminal blocks.
Panel mount terminal blocks are a convenient and cost effective method of wiring components to each other in an electrical enclosure. The panel mount terminal block consists of two grooved steel rail sections, which are held in place by metal clamps. It is mounted on an electrical enclosure wall or cover plate. The two electrical rails or grooves are then connected using a series of jumper blocks, connectors, or splices. The blocks are made from highly corrosion resistant metals such as stainless steel, copper, aluminum and brass.
Panel mount terminal blocks are available in a variety of sizes and shapes to accommodate different types of electrical components. They are also available with several different types of insulation. These include plastic, PVC, and even ceramic. The insulation can be in either solid or split form. Solid insulation is typically used for more specialized applications such as electrical control systems or electrical panels. Split insulation is typically used in more general purpose applications such as in distribution boxes and circuit breakers.
In most applications, panel mount terminal blocks are connected to each other using screws or bolts. These screws or bolts are typically provided with the terminal blocks. Panel mount terminal blocks require a special type of screwdriver for installation, as regular screwdrivers may not fit. The screws or bolts must have a suitable number of threads for the application. It is important to make sure that they are tightened adequately so that the connection is secure.
The working principles of panel mount terminal blocks are fairly straightforward. Once the rail sections are installed, the corresponding connectors can be attached to the rails. Generally speaking, each connector is capable of carrying one wire at a time. The terminals and the rails must be properly sized for the application, and for the type of wires being used. Panel mount terminal blocks can be used in conjunction with a variety of fuses, circuit breakers, transistors, and relays.
In conclusion, panel mount terminal blocks are used in a wide variety of applications and are an indispensable part of any electrical system. They offer secure and convenient wiring options for a variety of components. They are relatively easy to install and provide a high levels of safety when used correctly. When installing any type of panel mount terminal blocks, it is important to make sure that the proper type of screwdriver is used, and that the screws/bolts are tightened adequately for secure connections.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
10054365-182110ELF | Amphenol FCI | 0.2 $ | 1000 | CONN FPC BOTTOM 18POS 0.5... |
182109 | Amphenol RF ... | 5.5 $ | 1000 | CONN ADAPT JACK-JACK UHF ... |
182100 | Amphenol RF ... | 2.84 $ | 121 | CONN UHF PLUG STR CRIMPUH... |
182134 | Amphenol RF ... | 11.28 $ | 1000 | CONN ADAPT PLUG TO JACK U... |
182107S | Amphenol RF ... | 2.08 $ | 5 | CONN REDUCING ADAPT FOR U... |
182120 | Amphenol RF ... | 4.57 $ | 1000 | CONN UHF PLUG STR SOLDERU... |
M85049/1821N05 | Amphenol Pcd | 0.0 $ | 53 | CONN BACKSHELL CLAMP SZ 2... |
M85049/1821N03 | Glenair | 0.0 $ | 1000 | CONN BACKSHELL W/CLAMP SZ... |
M85049/1821N06 | Glenair | 0.0 $ | 1000 | CONN BACKSHELL W/CLAMP SZ... |
M85049/1821N08 | Glenair | 0.0 $ | 1000 | CONN BACKSHELL W/CLAMP SZ... |
M85049/1821W06 | Glenair | 0.0 $ | 1000 | CONN BACKSHELL W/CLAMP SZ... |
M85049/1821W08 | Glenair | 0.0 $ | 1000 | CONN BACKSHELL W/CLAMP SZ... |
1821-10PK | Visual Commu... | 10.93 $ | 288 | LAMP INCAND T3.25 MIN SCR... |
1821 | JKL Componen... | 0.34 $ | 1000 | LAMP INCAND T3.25 MIN SCR... |
182117 | Amphenol RF ... | 1.67 $ | 1000 | CONN MINI UHF JACK STR 50... |
182118 | Amphenol RF ... | 2.22 $ | 90 | CONN MINI UHF PLUG STR 50... |
182115 | Amphenol RF ... | 3.18 $ | 483 | CONN UHF PLUG STR CRIMPUH... |
182130 | Amphenol RF ... | 3.69 $ | 58 | CONN UHF PLUG STR CRIMPUH... |
182103 | Amphenol RF ... | 3.54 $ | 174 | CONN UHF PLUG STR SOLDERU... |
182107 | Amphenol RF ... | 0.41 $ | 1000 | CONN REDUCING ADAPT FOR U... |
182108 | Amphenol RF ... | 0.41 $ | 1000 | CONN REDUCING ADAPT FOR U... |
182101 | Amphenol RF ... | 7.97 $ | 1000 | CONN UHF PLUG STR SOLDERU... |
182114 | Amphenol RF ... | 6.15 $ | 1000 | CONN MINI UHF RCPT STR 50... |
182130-10 | Amphenol RF ... | 4.9 $ | 1000 | UHF STRAIGHT CRMIP PLUG, ... |
182131 | Amphenol RF ... | 5.15 $ | 1000 | CONN UHF RCPT STR SOLDERU... |
182102 | Amphenol RF ... | 4.0 $ | 55 | CONN UHF PLUG STR SOLDERU... |
F05E-182146R | Harwin Inc. | 0.0 $ | 1000 | CONN FPC BOTTOM 18POS 0.5... |
M85049/1821W05 | Amphenol Pcd | 41.03 $ | 90 | CONN BACKSHELL CLAMP SZ21... |
M85049/1821W04 | Amphenol Pcd | 55.5 $ | 23 | CONN BACKSHELL CLAMP SZ21... |
182116 | Amphenol RF ... | 3.81 $ | 1000 | CONN UHF PLUG STR SOLDERU... |
182112 | Amphenol RF ... | 2.42 $ | 1000 | CONN MINI UHF JACK STR 50... |
182135 | Amphenol RF ... | 2.45 $ | 1000 | CONN UHF PLUG STR CRIMPUH... |
182106 | Amphenol RF ... | 2.56 $ | 1000 | CONN UHF PLUG STR SOLDERU... |
182129 | Amphenol RF ... | 10.2 $ | 1000 | CONN UHF JACK STR CRIMPUH... |
182123 | Amphenol RF ... | 2.07 $ | 95 | CONN MINI UHF PLUG STR 50... |
182101-10 | Amphenol RF ... | 4.17 $ | 50 | CONN UHF PLUG STR SOLDERU... |
182113 | Amphenol RF ... | 5.79 $ | 100 | CONN MINI UHF JACK STR 50... |
1821A | Keystone Ele... | 0.79 $ | 1921 | HEX STANDOFF #10-32 ALUM ... |
1821B | Keystone Ele... | 0.32 $ | 1000 | HEX STANDOFF #10-32 ALUM ... |
1821C | Keystone Ele... | 0.36 $ | 1000 | HEX STANDOFF #10-32 ALUM ... |
TERM BLK HEADER 12POS GREEN12 Position T...
TERM BLK SCREW CLAMP 1POS GRAY1 Position...
TERM BLK HEADER 3POS GREEN3 Position Ter...
TERM BLK SCREW CLAMP 1POS BLACK1 Positio...
TERM BLK SCREW CLAMP 1POS BLACK1 Positio...
TERM BLK SCREW CLAMP 1POS BLACK1 Positio...