1843270000

Mounting Type:	Through Hole
Screw Thread:	M3
Torque - Screw:	0.5-0.6 Nm (4.4-5.3 Lb-In)
Screw Material - Plating:	--
Clamp Material - Plating:	--
Contact Material - Plating:	Copper Alloy - Tin Plated
Housing Material:	Polyamide (PA), Nylon
Operating Temperature:	-50°C ~ 100°C
Color:	Orange
Features:	Interlocking (Side)
Wire Termination:	Screw - Clamping Yoke, Tension Sleeve
Series:	Omnimate LP
Wire Gauge:	12-26 AWG
Voltage:	300V
Current:	20A
Mating Orientation:	45° (135°) Angle with Board
Pitch:	0.197" (5.00mm)
Positions Per Level:	11
Number of Levels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Terminal blocks, also known as wire-to-board connectors, are electrical components used to connect wires in an electrical circuit. They are often found in electronics, home appliances, industrial control equipment, and other electrical applications. The 1843270000 terminal block is a specific type of terminal block designed with a variety of features and capabilities. This article will introduce the 1843270000 terminal blocks, discuss its application fields, as well as describing its working principle.

Application Field

The 1843270000 terminal blocks are widely used in a variety of industries. They are often found in industrial equipment, automotive and aerospace applications, consumer electronics products, and appliances. In the automotive and aerospace industries, the 1843270000 terminal blocks are used for power distribution, motor control, and signal transmission. In the consumer electronics industry, they are used to connect components in a particular device, often used in speakers and receivers. In the appliances industry, the terminal blocks are used for product testing and monitoring applications.

Working Principle

The 1843270000 terminal blocks are designed to connect wires in an electrical circuit. Each terminal block has a contact area, which can be either male or female. The contact area is then connected to the corresponding pin on the electrical component. As current flows through the wire, it creates a magnetic field that induces an electrical charge in the contact area of the terminal block, creating a connection between the two components. The connection is then held in place by a clip or screw, and is secure enough to remain in place in spite of vibration or shock.

Advantages

The 1843270000 terminal block has several advantages when compared to traditional wire-to-board connectors. It has a high current rating, which means it can withstand higher currents than traditional connectors. It is also designed to have a low contact resistance, which ensures the efficient flow of current. Additionally, it has a wide operating temperature range, which makes it suitable for use in a range of environments. The terminal block is also designed to be easy to install, as it has an integrated locking mechanism which allows it to be secured in place with minimal effort.

Conclusion

The 1843270000 terminal blocks are a specifically designed type of wire-to-board connector, which offers several advantages over traditional connectors. It is widely used in a variety of industries, and is commonly used in automotive and aerospace applications, consumer electronics products, and appliances. It works by having a contact area which is connected to the corresponding pin on the electrical component. The connection is then held in place by a clip or screw. By having a high current rating, low contact resistance and wide operating temperature range, it is highly efficient and reliable for use in a range of environments.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description