1845CH14A270 RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF directional couplers such as 1845CH14A270 are widely used in wireless communications, broadcast, radar, navigation, and other applications.
The 1845CH14A270 RF Directional Coupler is a type of directional coupler used to measure the power of a signal transmitted by an RF circuit. The 1845CH14A270 has a frequency range of 0.5 MHz to 2.5 GHz, a power range of 1 dB to 21 dB, and a Type N input/output. The 1845CH14A270 is capable of measuring both the magnitude and the phase of the input signal, which makes it suitable for applications such as power monitoring, impedance matching, and antenna alignment.
Directional couplers work by splitting the input signal into two outputs, one of which is the “direct” or “forward” power which is measured, and the other of which is the reflected power which is discarded. This allows the direct power level of the signal to be measured without interference from the reflected power. These two outputs are connected to a device such as a diode detector or a power meter for accurate measurement of the power level.
The 1845CH14A270 RF Directional Coupler is constructed using a number of components, including power dividers, attenuators, isolators, transformers, filter networks, and bi-directional detectors. The components of the coupler are specifically designed to provide an accurate measurement of the signal level at the input of the coupler. The power dividers and attenuators are used to divide the input signal power into two separate outputs, while the isolators protect the coupler from environmental conditions such as high temperature and humidity. The transformers and filter networks help to shape the input signal and reduce any reflections that may be present on the signal, while the bi-directional detectors measure the magnitude and phase of the input signal.
The 1845CH14A270 RF Directional Coupler is used in a variety of applications, including antenna alignment, power monitoring, and impedance matching. In antenna alignment, it is used to measure the relative amplitude and phase angles of the transmitted signals in order to accurately align the antenna system. In power monitoring, the coupler is used to measure the power of the transmitted signals in order to identify any problems with the transmission system. Finally, in impedance matching, the 1845CH14A270 is used to measure the impedance characteristics of the antenna system to ensure it is matched to the transmitting system.

The specific data is subject to PDF, and the above content is for reference