1868649

Mounting Type:	Through Hole
Screw Thread:	M2.5
Torque - Screw:	0.4-0.5 Nm (3.5-4.4 Lb-In)
Screw Material - Plating:	--
Clamp Material - Plating:	--
Contact Material - Plating:	--
Housing Material:	Polyamide (PA), Nylon
Operating Temperature:	--
Color:	Black
Features:	Interlocking (Side)
Wire Termination:	Screw - Pressure Clip
Series:	COMBICON FRONT
Wire Gauge:	12-30 AWG
Voltage:	300V
Current:	10A
Mating Orientation:	Vertical with Board
Pitch:	--
Positions Per Level:	1
Number of Levels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Terminal Blocks - Wire to Board (1868649) are a type of connector that are specifically designed to connect electronic components with wires. They consist of a block-like body with two metal contact points connected by wiring that is encased in plastic or metal housing. The contact points are then connected to a PCB and the other end of the wiring attached to the electronic component. Terminal blocks are commonly used in all types of electronic circuits from mobile devices and computers to medical equipment and industrial machines.

Application Field

Terminal Blocks - Wire to Board are widely used in a variety of applications in the electrical and electronics industries. These include applications for signal conditioning, data communication, and power distribution. For example, in telecommunications systems, terminal blocks are used to connect the signal getting from the switching device to the distributed system. In automotive applications, terminal blocks are used to connect the electronic devices to the power source as well as for connecting the devices to the ground.In industrial applications, terminal blocks are extensively used to isolate and secure electrical components in control panels such as motor starters, pressure sensors, temperature controllers, and UPS systems. Terminal blocks also form an integral part of high-power industrial applications), like electric furnace, heaters and boilers where their resistance to electrical interference makes them extremely reliable.

Working Principle

Terminal Blocks - Wire to Board is a high-quality product. It is used to provide proper electrical connection in various applications. It works on the principle of conduction. It consists of two metal contact points which are connected to a wire and encased in a housing. The two contact points allow the current to flow from one component to another.The contact points on the terminal block are bent and soldered. This ensures that the current flows only one way with no backflow. The solder connection helps keep the two contact points firmly connected and prevents any leakage of current. The metal contact points are then insulated with a plastic housing to protect them from any wire damage or fire.

Installation of Terminal Blocks - Wire to Board

Installing a Terminal Blocks - Wire to Board requires particular care since the wires will be moving through it and the current may cause arcing if it is not properly insulated. First, the wires are stripped of their insulation which is necessary for proper conduction. Then, the contact points are inserted into the terminal block and the wires are pushed through the back.The contact points are then secured in place with a screwdriver, and tightening it down as much possible. Then, the wiring is secured by wrapping it around the screw terminals several times. Heat-shrink sleeves should be installed to further insulate and protect the wiring. Finally, the connection is tested with a multimeter to ensure that the connection is made properly.

Conclusion

Terminal Blocks - Wire to Board are widely used in a variety of electronic applications, from telecommunications and automotive to industrial systems. They are a reliable product, working on the principle of conduction, and are relatively easy to install provided the correct steps are taken. In conclusion, Terminal Blocks - Wire to Board are a useful and reliable electrical component for connecting electronic components with wires.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description