1944-14K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Since its introduction in 1944, the 14K application field has become one of the most widely used fixed inductors in the electronics industry. To put it simply, a 14K application field is an inductive device used to control a voltage or current. It is made by winding a coil of wire onto a magnetic core that acts as an inductor, and adds a certain type of air gap between the two to change the magnetic characteristics of the device. The inductor will then be able to filter and transform signals based on the specific parameters of the installed air gaps.

The most popular and widely used 14K application field is found in power electronics like voltage and current regulators. These devices also typically have magnetic flux transformers, where the magnetic core can be used to filter or couple two different circuits. The magnetic core also plays a part in maintaining a steady output voltage, since it acts as a buffer between any fluctuations in the power supply or output current.

The overall working principle of a 14K application field is fairly simple, yet effective. The inductor starts by creating an electromagnetic field (EMF) from the metal core, when it is exposed to an alternating current (AC) source, like the electric grid. This EMF will induce a voltage in the air gap between the two ends of the coil. As the voltage generated by the AC source increases, the inductor will store the extra energy as a magnetic field in its core. This stored energy will then be released back into the circuit with an opposite polarity to what was put in, creating an opposition to any further increases in current. This opposition will cause the current to dip and reduce the voltage along with it, thus regulating the output voltage.

In summary, 14K application fields are used mostly in voltage and current regulator circuits. They are made of wound coils of wire paired with a magnetic core. The air gap between the two creates an electromagnetic field from the AC power source and is used to store the excess energy, which gets released back with an opposite polarity to reduce the voltage.

The specific data is subject to PDF, and the above content is for reference