1984701

Series:	COMBICON PT
Packaging:	Bulk
Part Status:	Active
Number of Levels:	1
Positions Per Level:	11
Pitch:	0.138" (3.50mm)
Mating Orientation:	Horizontal with Board
Current:	10A
Voltage:	300V
Wire Gauge:	16-26 AWG
Mounting Type:	Through Hole
Wire Termination:	Screw
Features:	Interlocking (Side)
Color:	Green
Operating Temperature:	--
Housing Material:	Polyamide (PA), Nylon
Contact Material - Plating:	--
Clamp Material - Plating:	--
Screw Material - Plating:	--
Torque - Screw:	0.22-0.25 Nm (1.9-2.2 Lb-In)
Screw Thread:	M2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

< Terminal blocks, or terminal boards, are a type of electrical connection component that simplifies wiring and minimizes electrical connection complexity. They provide a reliable, permanent interconnection between two pieces of electrical equipment, while also providing the ability to disconnect them when required. Terminal blocks can be used in many applications where reliable connection and simplicity are paramount.Terminal blocks are commonly used in many types of industrial applications, including automotive, manufacturing, and control equipments. They are an essential and efficient way to make electrical connections, allowing for greater efficiency and cost savings while still providing reliable and secure connections.Terminal blocks can be classified into two main categories: wire-to-board and board-to-board. Wire-to-board terminal blocks are the most common type, used in a variety of terminals. They are used to connect individual wires from a source or device to a board or component. They can be further divided into several types, including spring-clamps terminals, insulation displacement crimp terminals, screw terminals, solder cups, and mounting blocks. Each type has its own specific characteristics and uses, depending on the application.Wire-to-board terminal block connections have a few basic components - the wires, the metal contact, and the connector. The wires are either soldered or crimped to the contact depending on the connection type. The contact is then inserted into the connector, which is usually made of plastic, to create a secured connection. Wires can be connected in either parallel or series, depending on the requirement of the application. Terminal blocks are used in a wide range of industrial applications, as they provide the necessary connectivity and simplicity. They are especially useful in applications where they need to be constantly connected and disconnected. For example, they can be used in factories or laboratories to quickly connect various pieces of equipment for testing purposes. Terminal blocks are also used in power distribution. This type of terminal block is usually wired in parallel, providing AC or DC power to multiple components that are connected in the same circuit. For example, they can be used to distribute power to different outlets in a building. Terminal blocks have a few key advantages that make them preferred over other types of connections. They provide a reliable and secure connection between two pieces of equipment, which results in a stronger electrical connection. Additionally, they are simple to install and require minimal maintenance and can be easily reconfigured when needed.In summary, terminal blocks provide an efficient and secure way to make various types of electrical connections. They are used in a wide range of applications, from power distribution to manufacturing, and can provide the necessary electrical connectivity and simplicity while minimizing complexity and cost.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description