1984769

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks are used for various applications where an electrical connection needs to be established between the wired and the pcb board. They can be used for both low and high voltage applications, and are available in a variety of configurations, ranging from single-pole up to 16-pole.

The most common type of terminal blocks used in wire-to-board applications is the screw type terminal block. These blocks feature a standard screw rail, usually located along the top side of the terminal block. A screw or nut is used to secure the wire in the terminal block. The actual electrical connection is made between the screw and the terminal block via an insulated surface that helps keep the connection secure.

For higher power applications, the terminal block might also be current-limiting or blocking type. In this case, the electrical connection is made through a semi-conductive or resistive material, usually rubber, that provides additional current limiting capabilities. This is a particularly useful feature when wiring high-current applications, where the current must be limited to prevent overload.

Another type of terminal block used in wire-to-board applications is the press-fit type terminal block. This type uses an insulated plastic sleeve, which is inserted into a metal channel and then pressed together to form the electrical connection between the wire and the terminal block. This type of terminal block provides a secure connection and is relatively easy to install.

The last type of wire-to-board terminal blocks are the spring-type terminal blocks. These blocks are typically used for lower power applications, and like the press-fit type, use an insulated plastic sleeve to make the connection between the wire and the terminal block. The major difference is that for the spring-type terminal block, the sleeve is held in place by a spring mechanism, which makes it much easier to install and provides a more secure connection.

Terminal blocks can be used for various applications, ranging from simple low power connections to more complex high power connections. Each type has its own advantages and should be chosen based on the application requirements. Choosing the right type of terminal block will ensure a secure and reliable connection that will last for years.

The specific data is subject to PDF, and the above content is for reference