1996318-1 Connectors, Interconnects

Coaxial Connectors (RF)

Coaxial connectors are their identifiers in basic electrical circuits and are commonly used as radio frequency connectors for short distances. They can be used for a variety of low-power RF applications, such as connecting wireless antennas, cable TV, and even infrared (IR) receivers. The 1996318-1 connector is a type of coaxial connector used in low-power applications. It has a typical frequency of applications up to 4GHz and has a good shielding capacity.

Application Field

The 1996318-1 coaxial connector is a relatively small, low-cost and reliable device. This connector is typically used to connect two-way RF devices with a center conductor. It can be used in a wide variety of applications, including radio antennas, GPS receivers, radio modems, digital TV devices, wireless network router and wireless adapters. The 1996318-1 connector is also widely used in power amplifiers, as it offers a good shielding capacity against interference.

Working Principle

The 1996318-1 coaxial connector uses a single conductor surrounded by dielectric insulation. This dielectric provides electrical isolation between the center conductor and the shell. This insulation also helps to keep the signal clean, preventing any noise or interference from being introduced to the signal. Inside the connector there is a contact pin that is connected to the center conductor, which allows power to flow through the connector. The shell, or outer ring, of the 1996318-1 connector has a number of small pins that are arranged around its circumference. These pins provide electrical contact between the shell and center conductor.

The 1996318-1 is normally designed to provide a low-cost solution for low power applications. It also has a low insertion loss and a good shielding capacity over a wide frequency range. This makes it suitable for a number of different applications, including radio antennas, GPS receivers, radio modems, digital TV devices, wireless network router and wireless adapters. The 1996318-1 is a reliable connector with good shielding capacity and thermal stability, making it suitable for use in many different applications.