199D104X0035A6B1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are electronic components typically used as an energy storage device, usually as a smoothing or decoupling device. They are constructed from a tantalum anode, a dielectric layer, and a conductive cathode. They are available in various configurations, such as a solid tantalum oxide electrolytic or a non-solid polymer capacitor. The specific model 199D104X0035A6B1 belongs to the solid tantalum oxide electrolytic capacitors category.

Specifically, the 199D104X0035A6B1 is an axial electrolytic capacitor with a tolerance of ±20%. It has a capacitance of 10μF, and a rated voltage of 6.3 VDC. The operating temperature range is –55 to +125°C and the case and leads can withstand soldering up to 260°C for 10 seconds. Its rated dissipation factor is a minimum of 0.2 and its equivalent series resistance is a maximum of 20 ohms. It is also non-polarized, which means that its anode and cathode connections are interchangeable.

The usage and application of the 199D104X0035A6B1 is similar to any other capacitor, but it typically excels in high-temperature and high-humidity environments due to its high heat and moisture resistance. Capacitors are widely used in almost every type of consumer electronics, with their purpose being to store energy. They can also be used as filters and coupling elements, as well as act as snubbers to improve system stability.

The working principle of any capacitor is based on the same fundamental principles. All capacitors have two terminals, one being the anode and the other the cathode. These terminals are separated by an insulating dielectric material, and when a voltage is applied across the terminals, an electric field is created in the dielectric material. This electric field stores energy, and this energy is proportional to the surface area of the electrodes and the electric field\'s strength. When the voltage is removed, the energy stored inside the capacitor slowly dissipates, filtering out fluctuating signals and providing clean DC power to the circuit.

The 199D104X0035A6B1 uses solid tantalum oxide as its dielectric material, allowing it to better tolerate high temperatures and humidity. The tantalum oxide gives it a much higher capacitance-to-volume ratio than that of its ceramic counterparts. The solid construction also allows the capacitor to handle reverse voltages much better, with internal leakage being the only consideration.

Tantalum capacitors such as the 199D104X0035A6B1 are reliable, cost-effective, and easily available components that are widely used in consumer electronics. They are especially common in high-temperature, high-humidity environments, and are favoured for their compatibility with surface mount assembly techniques and their ease of use. With a wide range of sizes and types, they offer a level of performance not offered by any other type of capacitor.

The specific data is subject to PDF, and the above content is for reference