199D105X0025A1V1E3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are flexible components in electronics design, used in a variety of applications across many industries. The single most important parameter of a tantalum capacitor is its dielectric strength. The strength of this electrical field is determined by the thickness and permittivity of the dielectric material. When used in combination with the correct capacitor type, tantalum capacitors provide the necessary power and performance for a number of applications. This article will focus on 199D105X0025A1V1E3 capacitor and their application field and working principle.

Classification of Tantalum Capacitor

Tantalum capacitors are categorized depending on their construction type. The two most common types are solid and wet-slug tantalum capacitors. The wet-slug type consists of a solid manganese dioxide powder and is typically coated with a resin or other insulation material. The solid type is more robust and features a sealed case with an insulating material. They are available in various leaded and surface mount configurations and have distinct performance characteristics.

The 199D105X0025A1V1E3 Capacitor

The 199D105X0025A1V1E3 capacitor is a wet-slug type capacitor. It features a shield case and is a non-polarized type device. It has an operating temperature range of -55° C to +125° C and is designed with a limited duty cycle of 1000 hours at rated voltage. The dielectric strength of this capacitor is rated at 1900 volts and its ripple current is rated at 0.83 A.

Application Field and Working Principle

Tantalum capacitors are used in a variety of applications across many industries. These capacitors are of particular value for filtering, blocking and bypassing applications in both power and signal circuits. The 199D105X0025A1V1E3 capacitor is no different. This capacitor is designed for use in electronic circuits where fast switching and high reliability is required. Its relatively low equivalent series resistance (ESR) allows it to operate efficiently and quickly, saving space, power and cost. It\'s also notable for its tolerance to high surge current and vibration, and its ability to withstand prolonged exposure to the most extreme environments.

The basic principle of working of a tantalum capacitor is the same as any other capacitor. It stores electrical energy in the form of an electric field between two conductive plates, separated by a dielectric material. This electric field is built up when a direct current (DC) is applied across its terminals. When the voltage is removed, the electric field slightly decreases, and the capacitor will discharge slightly. This is known as the dielectric absorption. Depending on the applied voltage, the capacitor\'s electrostatic capacity will vary, increasing with higher voltages.

The 199D105X0025A1V1E3 capacitor is designed to work across a wide temperature range with a rated voltage of 16 volts. This capacitor has a non-solid dielectric containing electrolyte between two metal plates. It also has an extended life, high ripple current and low ESR. This makes it well suited for high frequency power circuits such as those found in switch mode supplies, AC/DC converters and RF amplifiers.

Conclusion

In conclusion, the 199D105X0025A1V1E3 tantalum capacitor is a wet-slug type device with a shield case and is a non-polarized type device. It is designed for use in electronic circuits where fast switching speeds and high reliability are required. Its excellent tolerance to high surge current, vibration and extended life makes it a well-suited choice for use in high frequency power circuits. Its wide temperature range and excellent ripple current make it well suited for a variety of applications across many industries.

The specific data is subject to PDF, and the above content is for reference