199D105X9016A6B1E3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are often used in many developments of devices and systems. The ceramic or plastic versions of the same kind of capacitor are smaller in size and cost less, however, the tantalum versions offer much higher energy densities and are therefore more reliable when used in such devices. The 199D105X9016A6B1E3 is one of the most common tantalum capacitors on the market. It is used in many different devices and applications, and has a wide range of voltage ratings, capacitances and case sizes.

Within the 199D105X9016A6B1E3 application field, the capacitor is most famously used for bypass, filtering, decoupling as well as energy storage applications. In these applications, the capacitor is most often used as a parallel device, meaning that it is connected at both of its terminals to the same power source. The power for the bypass applications is commonly provided by a low-ESR capacitor. The purpose of this configuration is to provide an immediate connection to the power source, allowing higher frequency signals to pass through quickly while being retained at lower frequencies.

Filtering uses the 199D105X9016A6B1E3 to separate out signals that contain unwanted or excessive noise. This includes signals that are generated by computers or other devices that produce large and abrupt changes in power or voltage levels. A filter will allow only the frequencies that meet the desired standards, while blocking out frequencies that are too low or too high. Decoupling also involves the use of this type of capacitor. By connecting across two different points in an electrical circuit, the capacitor helps to isolate and stabilize the power flow, ensuring that the circuit does not leak power or become overloaded.

The last application of the 199D105X9016A6B1E3 is for energy storage. This is done by using the capacitor to temporarily store power for electronics and other devices. The capacitor is usually placed close to the load and is able to store power for short-term use. This is especially important for power-sensitive and high-frequency circuits, as it allows for quick and consistent response without requiring a larger battery. This type of capacitor helps improve the efficiency of many power-sensitive devices.

When it comes to the working principle of the 199D105X9016A6B1E3, the capacitor operates on the same basic principle as all other capacitors. This means it contains two electrically isolated plates and a dielectric insulating material between them. This causes a phenomenon called capacitance, which basically means that the capacitor has the ability to store electric energy. As the capacitor charges, one plate accumulates electrons and the other plate will not, creating a buildup of electrical energy. This energy is then discharged when current is applied to the capacitor, allowing it to be used for a wide range of applications.

The 199D105X9016A6B1E3 is an essential component for many different applications. Its consistent performance and reliable capabilities make it a favorite of many circuit designers, engineers, and users alike. It is a prime example of the benefits that can be gained from using tantalum capacitors, and the wide range of applications in which they can be used.

The specific data is subject to PDF, and the above content is for reference