199D105X9025A6A1E3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are a type of electrolytic capacitor which uses tantalum as the anode of the capacitor. Unlike most other types of capacitors, tantalum capacitors are able to handle higher voltages and are much more reliable. Their greater reliability makes them particularly attractive in applications where a potentially high failure rate could be disastrous.

The model 199D105X9025A6A1E3 is a small form factor surface-mount tantalum capacitor. It has an ESR (Equivalent Series Resistance) of between 4 and 10 ohms and a typical capacitance of 10uF. This particular model is well suited for decoupling applications and is used in many consumer devices such as laptops and phones.

The working principle of a tantalum capacitor revolves around the fact that it contains an electrolyte between its two leads. This electrolyte is sandwiched between two pieces of conductive material, one being the anode and the other the cathode. When a voltage is applied to the capacitor, ions from the electrolyte are attracted to the anode and form a thin layer of oxide on its surface. This oxide layer can store electrons and acts like a dielectric, allowing the capacitor to store a charge. When the voltage across the capacitor is reversed, the oxide layer is broken down and the charge is discharged.

Tantalum capacitors are primarily used in electronic circuits that require high stability, reliability, and low leakage. They are used in many consumer electronic devices such as laptops, phones, automobiles, and medical equipment. They are also used in industrial equipment, radio frequency systems, and aerospace applications. In applications where high stability and reliability is needed, tantalum capacitors are the preferred choice.

Tantalum capacitors are typically more expensive than other types of capacitors and are not suitable for use in all applications. They can also be unpredictable in terms of their performance and may cause instability in a circuit, depending on the application. Despite these drawbacks, they remain an attractive option due to their high reliability, small size, and high voltage handling capability. For these reasons, they are an increasingly popular choice in many areas of modern electronics.

The specific data is subject to PDF, and the above content is for reference