199D475X9016B2V1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors, also known as solid electrolytic capacitors, have become an essential part of modern electronic circuits. They are widely used in many applications such as telecommunications, automotive, computer and home entertainment electronics. The 199D475X9016B2V1 is a type of tantalum capacitor, and it has the ability to store and discharge energy in order to acquire proper voltage levels.

Tantalum capacitors are made up of two conducting plates and a conductive electrolyte which are separated by an oxide layer. The two conducting plates are made of tantalum, a highly dense metal, while the oxide layer is usually made up of either tantalum or niobium, another rare-earth metal. This oxide layer acts as the dielectric in the capacitor, allowing a certain amount of energy to be stored in the capacitor.

The 199D475X9016B2V1 utilizes this same construction. The two tantalum plates are made in a disk shape and are connected to pins which can be soldered into a circuit board. These pins then act as the terminals for the capacitor. One terminal is connected to the positive lead of the capacitor, and the other is connected to the negative lead. In this way, electric current can flow freely between the two leads of the capacitor, allowing it to store and discharge energy.

The capacitance of the 199D475X9016B2V1 is of particular importance as it is directly related to how much energy can be stored in the capacitor. The capacitance is usually measured in farads, and the higher the value of the capacitor, the greater the amount of energy that can be stored in it. The 199D475X9016B2V1 has a capacitance of 4.7uF, which is considered to be a good value for many applications.

In addition to storing and discharging energy, the 199D475X9016B2V1 also has the capability to filter out any unwanted noise from the circuits it is connected to. This can be especially useful in applications where the noise in the signals being read or transmitted is high. The tantalum capacitor absorbs some of the noise, thus ensuring that only those signals of a certain frequency are transmitted or received.

The 199D475X9016B2V1 tantalum capacitor can also be used for regulating voltage. It does this by adjusting the amount of energy stored in the capacitor, thus helping to maintain an even voltage level. This effect can be also enhanced by increasing the capacitance of the capacitor, which lowers the rate of voltage change in the circuit.

The 199D475X9016B2V1 tantalum capacitor is an important component in the many different types of modern electronics. It is used to store and discharge energy in order to maintain proper voltage levels. It also helps to filter out unwanted noise, and it can be used to regulate voltage. As such, it is an essential part of many different kinds of circuits.

The specific data is subject to PDF, and the above content is for reference