1B0264-3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Directional Couplers have been used in various applications for many years, primarily because of their ability to separate two electrically separated objects from one another. The 1B0264-3 Directional Coupler is a commonly used device which is designed to provide a bridge between two components while ensuring that signal interchange between them is limited.

The 1B024-3 Directional Coupler is an RF coupler, meaning that it is used to produce two signals simultaneously from a single source. These two signals are typically output at different power levels which allow for one signal to be amplified while the other is attenuated. This type of coupling is useful in a variety of applications and is often used to measure or control the amplitude and phase of an RF signal.

The 1B0264-3 Directional Coupler is specifically designed for high frequency applications, such as those which involve frequencies above 100MHz. This type of coupler employs a design which uses a half-wavelength shorted to a ground plane. The output of the coupler is typically split into two equal signals, each having different levels of amplification. This allows for one signal to be amplified while the other is modulated or attenuated.

The 1B0264-3 Directional Coupler is an already low-cost solution that can provide excellent signal isolation and performance. It is typically used in applications such as signal measurement, interference reduction, and signal power management. It is also used in many communications, broadcasting, and cable systems.

The 1B0264-3 Directional Coupler’s main advantage is its ability to provide very reliable signal coupling at higher frequencies. This makes it an ideal choice for high-frequency applications, where any deviations in the transferred signals would result in significant problems or loss of signal transmission. Additionally, the 1B0264-3 Directional Coupler is also smaller and lighter than other RF couplers, which makes it easier to install and use.

In conclusion, the 1B0264-3 Directional Coupler is a highly efficient and reliable RF coupler designed to enable reliable signal transfer between two components. Its ability to transfer signals of different power levels allows for more efficient use of the transferred signal, in particular in applications which require high-frequency signal transmission.

The specific data is subject to PDF, and the above content is for reference