1C0266-3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1C0266-3 RF directional coupler is a passive wireless component that couples signals from a source connected to its input port to a load connected to its output port. This versatile RF components have numerous applications in many different areas of telecommunications, such as antenna systems, cellular radio, GPS, local area networks, and many more. Moreover, this device can perform a wide range of duties such as power measurement, filtering, impedance matching, and signal direction control. In terms of working principle, the 1C0266-3 RF directional coupler produces isolation between input and output through the series resonant circuit, which provides a correlation between forward signal and backward signal.

The 1C0266-3 RF directional coupler can be used in a variety of popular radio frequency (RF) applications, such as cellular radio, GPS, local area networks, and antenna systems. The device is used to couple a forward signal and a backward signal between two circuits, such as a transmitter and a receiver. This device helps isolate the forward signal from a reverse signal, thus increasing the reliability of data communication. In cellular radio, it helps create a clear, low noise connection between the mobile and the base station. In GPS, the device helps improve navigation accuracy by filtering out unnecessary signals. In addition, the 1C0266-3 RF directional coupler can also be used to measure power levels, as well as to filter, match impedance, and direct signals.

The 1C0266-3 works based on a series resonant circuit which creates a correlation between the forward and backward signals. A series resonant circuit is composed of one or more elements, such as coils or capacitors, which are connected in series. The circuit creates an alternating current when the frequency is within the cutoff frequency, which is determined by the series resonant circuit characteristics. The RF directional coupler works on the principle that when the incident wave enters the coupler, the forward and backward signals transmitted are inversely coupled. The reverse signal is separated from the forward signal by means of a reverse rejection, creating an isolation between input and output.

The 1C0266-3 RF directional coupler is a reliable and cost effective device that enables the isolation and control of incoming signals. This versatile device can be used in various applications to measure power levels, filter, match impedance, and direct signals. Utilizing a series resonant circuit, this device creates an isolation from a forward signal and a backward signal, thus increasing the reliability of data communication in critical situations.

The specific data is subject to PDF, and the above content is for reference