Allicdata Part #: | 1F0628-10-ND |
Manufacturer Part#: |
1F0628-10 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | |
Short Description: | COUPLER 10DB H STYLE 8-12.4GHZ |
More Detail: | RF Directional Coupler Military 8GHz ~ 12.4GHz 10d... |
DataSheet: | 1F0628-10 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Coupler Type: | Standard |
Frequency: | 8GHz ~ 12.4GHz |
Coupling Factor: | 10dB |
Applications: | Military |
Insertion Loss: | 0.5dB |
Power - Max: | 50W |
Isolation: | -- |
Return Loss: | 16.5dB |
Package / Case: | -- |
Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Directional Coupler
A 1F0628-10 is a type of RF directional coupler. It is a device that can sample and transfer electrical signals between ports without directly connecting them. This allows an electrical signal to be split into two separate signals along different paths while both signals remain isolated from each other and yet have similar electrical properties. The 1F0628-10 is typically used in an RF system to measure the power from a transmitter, as well as to control it.
Application Field
RF directional couplers are used to measure and transfer power as well as to control the strength of the signal in an RF system. They are also used to balance various signals within the system, ensuring that all parts of the system are operating at the same level. These types of couplers are also used in the laboratory to measure RF signals and to control them as part of a system. They can also be used to isolate unwanted signals from interfering with the system.
Working Principle
The 1F0628-10 RF directional coupler works by sampling the signal from the transmitting port and transferring that signal to a receiving port. This is done by means of a coil that is connected to both ports. When a signal is transmitted, it induces a current in the coil that is proportional to the power in the signal. This induced current is then detected by the receiving port and the signal is then transferred.
RF directional couplers are also used to control the power of a signal. This is done by varying the impedance of the coil, which affects the signal strength of the transmitted signal. By changing the impedance of the coil, the power of the signal can be adjusted, thus allowing for better control over the system.
The 1F0628-10 RF directional coupler is also used to balance the signals within an RF system. By varying the coil impedance, the power of the individual signals can be balanced, ensuring that all signals within the system are operational at the same level. This is important in order to maintain the performance of the entire system.
The specific data is subject to PDF, and the above content is for reference
COUPLER 6 DB 6-18GHZRF Directional Coupl...
COUPLER 20 DB 2-18GHZRF Directional Coup...
COUPLER HYBRID 1.2-1.85GHZRF Directional...
DIRECTIONAL COUPLERRF Directional Couple...
DIRECTIONAL COUPLER 1100MHZ 0805RF Direc...
DIRECTIONAL COUPLER 2100MHZ 0603RF Direc...