1J0770-3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Directional Couplers have a wide range of applications, such as radio-frequency (RF) measurements, microwave communication systems, RF power measurement, RF impedance measurements, spectrum analysis, antenna measurements, frequency division, signal filtering, and power control. The 1J0770-3 is a kind of high frequency directional coupler that is used for RF measurements in lower frequency ranges.

The 1J0770-3 is made of precision ferrite and is designed for small-sized high-frequency measurements that involve low frequency ranges, such as RF measurements ranging from 2GHz to 6GHz. It is composed of two coupled sections: a main line and an auxiliary line. The two coupled lines are connected at one point and form a four-port network, which is also known as a two-hole directional coupler. The 1J0770-3 can measure forward and reflected power in a directional coupler.

The 1J0770-3 is designed for the 4.3-8GHz band and is ideal for measurements of signals with power levels up to 20dBm. The maximum insertion loss of the 1J0770-3 is 0.3dB, with typical values being under 0.2dB. The typical gain of the 1J0770-3 is 0.5dB, and its typical directivity is 40dB. Its input and output return losses are typically higher than 10dB.

The 1J0770-3 Directional Couplers uses a variation in the impedance of an electric component to produce the required power splitting or directional measurements. The differences in impedance between the two coupled lines will determine the signal/power levels at each port. The two coupled lines are also tuned to minimize the reflection losses caused by the impedance mismatches. As such, the 1J0770-3 Directional Coupler has an efficient design and is reliable in its performance.

The 1J0770-3 offers a wide range of applications, but its main purpose is for making RF measurements. It can be used for measurements of antenna characteristics, signal jamming, power distribution, frequency division, transmission line characteristics, and system gains. By using the 1J0770-3 Directional Coupler, RF professionals can make accurate and precise measurements, as well as measure small signals with high sensitivity.

In summary, the 1J0770-3 Directional Coupler can be a valuable tool for RF engineers making measurements in the lower frequency ranges. Its efficient design and small size make it an ideal choice for making precise and accurate measurements, such as transmission line characteristics, antenna characteristics, and power distribution. The 1J0770-3 is an excellent choice for measuring small signals with high sensitivity, as well as for frequency division, jamming, and system gains.

The specific data is subject to PDF, and the above content is for reference