1M810S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A 1M810S RF Directional Coupler is a must-have piece of equipment for any RF-connected system which needs to monitor the transmitted or received signal from within the line. This device has a wide range of uses in both transmitter and receiver systems. It works by intercepting the signal traveling in a single direction and then splitting it into two paths, one of which is measured as a reference.

In most applications, 1M810S is a commercially available power splitter, which sends a portion of the signal to an isolation tap. This tap diverts a portion of the signal to a measured port which can be used to examine the signal trace electrically. The remainder of the signal continues through the device to its final destination without any loss of power or information.

The working principle of 1M810S is based on its ability to perform with low insertion loss and high isolation. It functions by separating the incident signal into two or three different paths by using a balanced tap. The separated signal portions are then reassembled into a combined signal or recombined signal at the measured port. Since a directional coupler functions to route the signal into two distinct paths, it allows the user to measure the signal characteristics in both directions.

The 1M810S RF directional coupler, in particular, is designed for use in high-bandwidth, wideband applications such as cellular base stations, radar systems, avionics, and satellite communications systems. The 1M810S can provide up to 20dB of port-to-port isolation and the power of the coupled signal is typically limited to +10dBm. This device also features a large bandwidth of 0-8GHz, which is suitable for most RF applications.

The main applications of 1M810S include RF signal monitoring, system calibration, spectrum analyzer setting, antenna impairments detection, and load tuning. It is also used in many other applications such as impedance measurement, power measurement, and high-frequency filter design. Additionally, 1M810S is ideal for various medical and scientific testing and research, especially in the field of RF communication.

In summary, 1M810S is an RF directional coupler used to separate and measure a portion of the signal traveling over the primary cable. It is designed for use in high-bandwidth, wideband applications and offers excellent isolation and port-to-port protection. 1M810S also provides a wide range of applications for system calibration, diagnosis, and testing, making it a valuable piece of industrial equipment.

The specific data is subject to PDF, and the above content is for reference