1N4107

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1N4107 is a single Zener diode which is widely used in a variety of different electrical applications. It is most commonly used for voltage regulation and protection in DC circuits. This diode is designed specifically for applications where the Zener voltage is needed to be more than 10 volts and less than 200 volts.

The 1N4107 is a semiconducting device which is composed of two terminals called the anode (positive) and the cathode (negative). The anode is connected to the external voltage source while the cathode is then connected to ground. The anode-cathode resistance of the 1N4107 is extremely low, which means that most of the voltage applied to the diode will flow directly to the cathode, rather than being dissipated as heat. This is the reason why the 1N4107 is so effective in voltage regulation and protection applications.

The primary function of the 1N4107 Zener diode is to regulate and limit the voltage in a DC circuit. When the voltage applied to the diode exceeds a certain point, known as the Zener voltage, the current flow through the diode increases drastically as it attempts to counteract the voltage. This surge in current is known as Zener breakdown, and it is this action which gives the diode its voltage regulating capability. The 1N4107 is often used in combination with a resistor to limit the current flow through the diode, thus improving its overall performance.

Another important use of the 1N4107 is in reverse voltage protection circuits found in many electronic devices. In these circuits, the diode is connected in reverse polarity, so that if enough current passes through the diode it will begin to break down in much the same way as it would have if it was connected in its normal orientation. When this happens, the diode will begin to act as a short circuit, quickly shunting the excess voltage away from the device and preventing possible damage.

The 1N4107 is also often used in ESD (electrostatic discharge) protection circuits. These circuits are designed to prevent an ESD (electrical shock) from entering a device when it is in contact with a human hand. In these applications, the 1N4107 is connected in series with a low resistance resistor. When the ESD voltage is applied to the diode, the low resistance resistor limits current flow through the diode, and the voltage is then shunted away from the device.

There are a number of other uses for the 1N4107 Zener diode, such as in motor control circuits, power management circuits, error detection circuits and voltage measure circuits. The capabilities of the diode in these applications are determined by its Zener voltage and the current capacity of the diode. As with other Zener diodes, the 1N4107 must be operated within its voltage and power ratings to ensure that it is able to perform its intended function reliably.

The specific data is subject to PDF, and the above content is for reference