1N4121UR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1N4121UR is a zinc oxide varistor that is classified as a single component Zener diode. It is designed to protect circuits from over-voltage and over-current events, by triggering a short circuit when the voltage or current rises above a preset level. The 1N4121UR is used mainly in consumer and commercial electronics, but is also found in safety-critical applications such as in medical equipment or military electronics.

The 1N4121UR acts like a thermistor, in which its resistance changes as the voltage or current passing through it changes. When the voltage or current goes beyond the preset level, it triggers the thermistor to the maximum resistance value and allows a much lower voltage or current passing through. This helps protect the downstream components from over-voltage and over-current by limiting the voltage and current that can be passed.

The 1N4121UR is a small size thermistor, typically measuring 6mm x 9mm x 2mm. It is made from zinc oxide, which is a type of material that exhibits non-linear characteristics and is used to protect circuits. The 1N4121UR has a maximum working voltage of 400V, maximum breakdown voltage of 480V and a power dissipation of 500mW. It has a maximum operating temperature of 125 degrees Celsius and a thermal cut-off temperature of around 152 degrees Celsius.

The 1N4121UR is a two lead device and is usually soldered directly on to the printed circuit board (PCB). It is designed to be integrated into the circuit as a protection element, ensuring that the voltage or current beyond a preset threshold is short-circuited and does not damage sensitive downstream components. The 1N4121UR works best in applications where stability and a high level of protection is required, such as in devices such as surge protectors, LCD TVs and set-top boxes, as well as in safety-critical applications such as medical devices.

In conclusion, the 1N4121UR is a single component Zener diode, made from zinc oxide. It is designed to protect circuits from over-voltage and over-current events by triggering a short circuit when the level of voltage or current exceeds the preset threshold. The 1N4121UR is mainly used in consumer and commercial electronics, but also finds application in safety-critical applications such as medical devices. The 1N4121UR is soldered directly onto the PCB and acts as a protection element, ensuring that components are not damaged by an excessive voltage or current.

The specific data is subject to PDF, and the above content is for reference