1N5312UR-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

1N5312UR-1 Rectifier

The 1N5312UR-1 rectifier is a single-diode semiconductor device rated for 30V and 1A (1N5312UR-1). It is widely used for polarity protection of small, low-voltage DC power supplies to help guard circuits from faults. The diode also helps to reduce power switching and ripple noise as well as reduce the stored energy that may create arcs or sparks during the operation of the power supply.

General Purpose Application

The 1N5312UR-1 rectifier is suitable for a wide range of general purpose applications. Such applications typically involve low voltage, slow to moderate frequency AC signals, as found in various home appliances, electronic medical instruments, electronic musical instruments, and other types of electronic equipment. It can be used for general-purpose AC bias coupling, DC polarity protection, and low voltage rectification of AC signals. It is also used for reverse voltage protection, noise reduction, and stabilization of current paths against switching and ripple currents.

Specific Applications

This device is most commonly used in AC/DC switching power supplies and voltage regulator modules. The 1N5312UR-1 is also used for polarity protection in a variety of computer-related equipment, such as disk readers, floppy disk drives, and printer drivers. It also finds applications in automotive electronics, including speedometers, regular radios and alarm systems. In addition, the 1N5312UR-1 is useful for polarity protection in radio receivers and transmitters. Furthermore, this rectifier is often found in a variety of audio devices, such as record players and amplifiers.

Alanning Principle of Operation

The 1N5312UR-1 diode allows electric current to flow only in one direction and prevents current flow in the opposite direction. It consists of an anode and a cathode, and when the cathode is more positive than the anode, the diode is in “forward biased” condition and therefore low-impedance conduction occurs between the two electrodes. However, when the reverse voltage is applied, the diode is in “reverse bias” condition, which prevents the current to flow between the two electrodes. This is the purpose of the diode, to block electric current in one direction and allow electric current in the other direction.

When the diode is forward biased, it has a certain threshold voltage that needs to be exceeded before current flows through it. Once the voltage across the diode is higher than the threshold voltage, the diode “turns on”, allowing current to flow through it. The 1N5312UR-1 rectifier has a forward voltage of 1V, so that when the voltage across it exceeds 1V, it turns on and current will flow. When the current is reversed, the diode turns off, prevents the current from flowing back and thus the circuit is protected from voltage spikes.

Conclusion

In conclusion, the 1N5312UR-1 rectifier is a single-diode device that is widely used for polarity protection of small, low-voltage DC power supplies. It is suitable for a wide range of general purpose applications, such as AC/DC switching power supplies and voltage regulator modules. Its primary function is to block electric current in one direction and allow electric current in the other direction. It also has a forward voltage of 1V, so that when the voltage across it exceeds 1V, it turns on and current will flow. The 1N5312UR-1 rectifier is a cost-effective and reliable device for many low-voltage applications.

The specific data is subject to PDF, and the above content is for reference