1R0263-3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

1R0263-3 RF Directional Coupler (RFC) is a device used to measure the power of RF signals. It is a type of radio frequency passive device typically used in wireless systems and other high-frequency signal processing applications. RF Directional Couplers enable the power of a signal to be measured by providing a certain degree of coupling between two transmission lines. It is usually used to measure power from transmission lines, antennas, and other RF sources, and can be used with other RF devices such as amplifiers, antennas, and filters.

RFCs are available in a variety of configurations to meet different needs. In general, the configuration of 1R0263-3 RF Directional Coupler consists of an RF transmitter, a receiver, and two transmission lines. The transmitter sends a signal to the receiver via the two transmission lines. The amount of signal that is coupled and transmitted to the receiver is determined by the directional coupler. The degree of coupling is affected by the design of the coupler, its physical size, and the nature of the RF signal.

The working principle of 1R0263-3 RF Directional Coupler is simple. It utilizes the phenomenon of coupled signals that travel in different directions between two transmission lines. The outer conductor of the two transmission lines is connected to each other and serves as a shield for the two signals. The inner conductors of both transmission lines are connected to the RF transmission line and the RF receiver respectively. When the RF signal is sent from the transmitter, its signal travels through the RF transmission line and is partially coupled into the receiver line. The amount of power that is coupled to the receiver line can be measured depending on the design of the coupler.

1R0263-3 RF Directional Coupler is often used in wireless communication applications such as base stations and mobile handsets. It is also used in a variety of other RF applications such as antennas, filters, amplifiers, etc. The device is also used in industrial applications for various types of measurements. This type of coupler is used in applications that require precise measurement of RF power due to its high accuracy and wide bandwidth.

In conclusion, 1R0263-3 RF Directional Coupler is a type of radio frequency passive device typically used in wireless systems and other high-frequency signal processing applications. It is used to measure the power from transmission lines, antennas, and other RF sources. Its working principle involves coupling two transmission lines so that the signal from the transmitter can be partially coupled to the receiver line. The device is used in a variety of applications that require the accurate measurement of RF power and it has a wide bandwidth.

The specific data is subject to PDF, and the above content is for reference