1SMB85CA TR13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS diodes are special protection components designed to prevent or reduce the effects of transient voltage surge events. The 1SMB85CA TR13 is a two-terminal bi-directional Transient Voltage Suppressor (TVS) designed to protect sensitive electronic equipment from electro-static discharge (ESD) and power surges. It is designed for applications where the system power supply voltage, VDD, is less than or equal to 13V.

The 1SMB85CA TR13 is a high-speed multilayer device that works on a breakdown principle. When the reverse bias voltage applied to the device exceeds the device\'s working voltage, the device breaks down and conducts current internally. Its breakdown voltage is typically 9 V to 11 V in the reverse direction. The device is designed to protect against asymmetric bi-directional transient events on data- or signal- lines. The device dissipates power during an over voltage transient by allowing current to flow through its internal junction.

The 1SMB85CA TR13 is uniquely suited for protection against ESD pulses because of its low capacitance, stand-off voltage rating and low maximum operating voltage. It is ideal for use in applications that require robust protection against ESD, EMI and power surges. The device is also well-suited for applications requiring a high-speed, low-capacitance protection element. The device is available in a variety of packages, including surface mount (SMD) and through-hole (TH) packages.

The device is designed to clamp power surges and surges that occur in a cable. The device is usually installed at the beginning of the power line, and its peak clamping voltage is designed to ensure that the power supply voltage does not exceed the maximum operating voltage of the equipment. The device is usually placed in parallel with the line under protection.

The 1SMB85CA TR13 operates by clamping the voltage across the line. The device\'s stand-off voltage is typically between 6V and 8V, and its peak clamping voltage should not exceed the maximum operating voltage of the system. During an over-voltage transient, the device allows current to flow by passing waves of signal and energy through its junction. The device also provides an electrical ground path for devices connected in series with it.

The 1SMB85CA TR13 is also designed to provide protection for digital and analog chip components, such as data converters, A/D and D/A converters, and line drivers. The device is designed to provide an electrical path that clamps voltage and dissipates energy during an over voltage transient or ESD strike. The device is designed to protect sensitive components from the damaging effects of ESD, EMI and over-voltage events.

In summary, the 1SMB85CA TR13 is a high-speed, low-capacitance protection element that offers protection against power surges, EMI and ESD events. The device is designed to protect sensitive components from the damaging effects of transient voltage surge events. The clamps and dissipates power during an over voltage transient or ESD strike. The device is available in a variety of packages, including surface mount (SMD) and through-hole (TH) packages.

The specific data is subject to PDF, and the above content is for reference