| Allicdata Part #: | 2-13-1DL-ND |
| Manufacturer Part#: |
2-13-1DL |
| Price: | $ 0.00 |
| Product Category: | RF/IF and RFID |
| Manufacturer: | Bourns Inc. |
| Short Description: | MAGNETICS RF TRANSFORMER |
| More Detail: | RF Balun 300kHz ~ 120MHz 1:13 6-DIP (0.330", 8.38m... |
| DataSheet: |  2-13-1DL Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Series: | -- |
| Packaging: | Tube |
| Part Status: | Active |
| Frequency Range: | 300kHz ~ 120MHz |
| Impedance - Unbalanced/Balanced: | 1:13 |
| Phase Difference: | -- |
| Insertion Loss (Max): | 3.0dB |
| Return Loss (Min): | -- |
| Package / Case: | 6-DIP (0.330", 8.38mm) |
| Mounting Type: | Through Hole |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
BALUN
Balun is a term used to describe a type of electrical device that can be used to connect two different types of circuits together. The term balun is an abbreviation for balanced-unbalanced, which refers to the two different types of circuits that can be connected with this device. The two primary types of circuits that can be connected with a balun are the balanced type and the unbalanced type. A balanced circuit is a circuit that uses two wires that are in line with one another. The two wires are usually connected to a transformer or inductor. An unbalanced circuit, on the other hand, does not have a symmetrical connection, but instead relies on an uneven distribution of power between two different points.
2-13-1DL Application Field and Working Principle
The 2-13-1DL application field utilizes a balun device, which is primarily used to match impedances between two circuits. It is often used to match the impedance of a coaxial cable to that of a balanced antenna, such as a dipole antenna or a Yagi antenna. The balun works by taking the high-impedance differential signal from the antenna and transforming it into a low-impedance single-ended signal. This transformation allows the signal to be transmitted along the coaxial cable without significant loss.
The working principle of the 2-13-1DL application field is relatively simple. It works by connecting the two balanced transmission lines, such as the center conductor and the outer shield of a coaxial cable, together with a balun device. The balun device then transforms the differential signal from the transmission lines into a single-ended signal. This single-ended signal is then transmitted to the intended destination without interference or signal attenuation.
Overall, the 2-13-1DL application field and the balun device make up an effective means of connecting two different types of signals. This type of connection is often used for antenna applications or for transmitting audio signals, as it provides an efficient and reliable method of transferring the signal from one device to another. It is also one of the simplest means of transferring a signal between two devices, since it does not require any complex circuitry or components to be used.
The specific data is subject to PDF, and the above content is for reference