2-1393589-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Backplane Connectors are relied upon to enable quick and easy communication between multiple components in mechanical, electrical, and logic systems. The 2-1393589-1 Backplane Connector is designed to provide reliable signal precision and consistent contact integrity in applications requiring high-density buses up to 360 pins. Its mechanical and electrical performance is designed to exceed the requirements of most data processing systems.

There are two primary components of the 2-1393589-1 Backplane Connector: contacts and housings. The contacts, which are inserted into the housing, serve as electrical connection points between the components. The housings provide a secure and reliable environment for the contacts. The contacts themselves are typically machined from a metal alloy, such as brass, and are designed for optimized insertion and extraction forces. Contacts may vary in number and size according to the particular application.

The 2-1393589-1 Backplane Connector offers a low insertion and extraction force and a secure contact engagement force. The contact pitch-to-pitch spacing may range from 0.050”-0.250”. The contact spring force is designed to prevent electrical and mechanical failure due to contact and contact spring fatigue, while at the same time complying with FCC and VDE limits.

The 2-1393589-1 Backplane Connector is rated for 500 mating cycles, with a current rating of 5A per contact at a maximum operating temperature of 105°C. The contact retention force is .50N minimum, and solder retention force is 2N minimum. The insulation resistance is 1000MΩ minimum, and the dielectric withstanding voltage is 500V AC.

The 2-1393589-1 Backplane Connector is designed for use with printed circuit boards (PCBs) and backplanes. The connector is constructed in a 1 row format, with either 1 or 2 signal contacts per row. The signal contact can be connected to the circuit board with either solder pads or thru-hole holes. The contact design permits a fully shielded environment, and the contact force is designed to maintain a reliable, low resistance connection.

The main working principle of the 2-1393589-1 Backplane Connector is the electrical connection between the contacts and the contact pad on the board. The contacts are designed to bear contact forces that provide reliable operation and contact integrity. The size of the contact pad on the board determines the contact force. Contacts are designed to provide low insertion and extraction forces while providing reliable contact engagement force.

The 2-1393589-1 Backplane Connector is suitable for use in applications such as data processing and communication systems, test equipment, industrial control systems, board level interconnects, and other applications which require reliable signal integrity. The 2-1393589-1 Backplane Connector provides an efficient, cost-effective solution for applications requiring the transfer of digital or analog signals.

The specific data is subject to PDF, and the above content is for reference