2-1630481-8

Series:	CB10, Citec
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Obsolete
Moisture Sensitivity Level (MSL):	--
Resistance:	470 kOhms
Power (Watts):	0.15W
Tolerance:	±20%
Temperature Coefficient:	±500ppm/°C
Number of Turns:	1
Adjustment Type:	Top Adjustment
Resistive Material:	Carbon
Mounting Type:	Through Hole
Termination Style:	PC Pins
Size / Dimension:	Rectangular - 0.433" x 0.386" Face x 0.236" H (11.00mm x 9.80mm x 6.00mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer Potentiometers

Trimmer potentiometers, also known as variable resistors, have been used in the electronic circuits for some time now. This versatile component is used for a variety of applications and is a must have for any modern circuit designer. The 2-1630481-8 is one such trimmer potentiometer that is available for use in a wide range of circuits.The 2-1630481-8 is a three terminal, multi-turn, linear-taper type trimmer pot. It features an adjustment screw with a shaft which is designed to fit into a slot in the housing of the pot to provide a controlled electrical resistance. A flange is also provided to ensure accurate positioning of the pot while adjusting the resistance. The body is made up of plastic making it easy to handle and lightweight. The resistance value can be changed by turning the adjustment screw that is located at the bottom of the pot. The current rating of the resistor is 5 mA and the contact resistance is 0.5 ohms. It has a 10K ohms resistance range and can be adjusted with an accuracy of ±20%.The trimmer potentiometer is mainly used in applications where precise adjustment of the resistance is required. It can be used to balance circuits such as amplifiers, oscillators, filters, and converters. It can also be used to adjust the voltage across the capacitor or to change the resistance of the resistors in the circuit. It is also used to adjust the frequency, gain, offset, and amplitudes of signals.Trimmer potentiometers are available in two varieties - linear taper and logarithmic taper. The 2-1630481-8 is a linear taper type trimmer pot. The main difference between these two types is in the way the resistance changes with the turn of the adjustment screw. With the linear taper design, the resistance changes linearly with the turn of the adjustment screw. That means, if you turn the screw in one direction, the resistance increases linearly with each turn of the screw, while if you turn it in the opposite direction, the resistance decreases linearly.The working principle of the trimmer pot is quite simple. It has three terminals - two fixed contacts and one adjustable contacts. When the adjustable contact is moved, it changes the resistance between the two fixed contacts. This change of resistance is what is used to achieve precise and precise adjustment of the resistance. The adjustment can also be done manually or by using a screwdriver.Trimmer potentiometers offer a great tool for a wide variety of applications. Their compact size, low cost and accurate adjustment makes them a great option for many electrical and electronic circuits. The 2-1630481-8 is a great option for those looking to add a trimmer pot to their circuits. With its 10K ohm range, it can be used for both precision and low-value adjustments. So, if you’re looking for a versatile trimmer pot, then the 2-1630481-8 is the one for you.

The specific data is subject to PDF, and the above content is for reference