2007777-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Backplane connectors are a specialized type of electrical connectors which are used when several circuit boards are mounted together to form a backplane. The backplane connectors typically connect the circuit boards using direct contact pad-to-pad interconnections, edge finger contacts, wiping contacts, or soldered connections. There are two main types of backplane connectors, based on the way in which they make connections between the boards:

• Serial Connectors, which connect the backplane boards in a serial fashion, using daisy-chain connections.
• Parallel Connectors, which connect the backplane boards in a parallel manner, using bus interconnects and/or point-to-point connections.

The 2007777-2 application field and working principle is a specialized type of backplane connector which is designed to connect multiple circuit boards together in a parallel manner, using bus interconnects and/or point-to-point connections. The 2007777-2 application field and working principle utilizes a special bus/point-to-point interconnect system, which features two bus strips on each of the circuit boards connected by card-edge connectors. This type of backplane connector is typically used in systems which require frequent addition/removal of circuit boards, as it is easy to expand or reconfigure the system.

When installing a 2007777-2 application field and working principle backplane connector, each circuit board must be fitted with a card-edge connector. The card-edge connector should be fitted closely to the board edge, using paddle-pins and rivets for added stability. The card-edge connector should then be wired to the bus strips, using either bus wiring or point-to-point connections. Once the connections have been made, the backplane should be tested to ensure that all of the necessary electrical connections are in place.

The 2007777-2 application field and working principle is designed to provide a reliable connection between multiple circuit boards which are mounted on a backplane. This type of backplane connector offers a high degree of flexibility, making it ideal for applications where cards may need to be added or removed from the system. Additionally, the 2007777-2 application field and working principle is a low-cost connector which is easy to install and maintain.

The specific data is subject to PDF, and the above content is for reference