200E2C15.5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

200E2C15.5 electrical specialty fuses are an important component in many circuits and equipment, providing overcurrent protection and current limiting capabilities. They are commonly used in electronic protection and control devices, motor starters, limit switches, and electric vehicles. Additionally, these fuses may be used to protect sensitive equipment from overcurrents due to short-circuiting and other causes.

The 200E2C15.5 consists of a ceramic housing with two terminals. It is a current-limiting, fast-acting, single-element fuse rated at 15.5 amps. The fuse contains a calibrated copper strip element which melts and breaks the electrical connection when the current is higher than the rated value. The current rating of the 200E2C15.5 is indicated on its body in white letters. The fuse also has a time-current characteristic, which means that it will open in a certain amount of time after a certain amount of current is applied. This feature helps to protect electrical circuits and equipment from thermal or other overcurrent damage.

When overcurrent protection is needed, the 200E2C15.5 is installed in series with the circuit or equipment being protected. The current must flow through the fuse if the circuit is to be protected. If the current exceeds the rated value of the fuse, the element inside the fuse will heat up and eventually melt, breaking the circuit and disconnecting the power. The fuse is then replaced with a new fuse to restore the circuit.

The 200E2C15.5 is UL recognized and CSA certified and meets UL and CSA standards for safety. It is designed to operate in circuits up to 250V AC or 150V DC. It is also capable of interrupting high current on short-circuit, such as 10,000A at 250V AC. The 200E2C15.5 is a reliable component for protecting electrical circuits and equipment from overcurrent damage.

The specific data is subject to PDF, and the above content is for reference