2036-25-SM-RP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube (GDT) arresters are designed to protect a wide range of electrical equipment and electronic components from lightning and high voltage transients. GDTs are a type of surge protection device (SPD) which uses a combination of components, such as fuses, varistors, and gas tubes, to absorb and limit the energy from surges and lightning strikes. They are typically used in outdoor applications, such as substations or other industrial areas, where lightning strikes and electrical disturbances are likely to occur.

The 2036-25-SM-RP arresters belong to the family of GDT. These devices can be used in indoor applications for various high voltage equipment protection. The 2036-25-SM-RP devices consist of a single, non-generating, gas gap which is filled with hydrogen and nitrogen to absorb and reduce the energy of a transient. In a 2036-25-SM-RP device, there is a single gas gap that is terminated in a base unit. When a high voltage transient is encountered, the gas gap is the portion of the arrester that restricts the energy. The 2036-25-SM-RP arrester is also capable of limiting the amount of current which passes through the protected load.

The working principle of a 2036-25-SM-RP gas gap arrester is based on the use of a dielectric breakdown between two electrodes. The breakdown must occur across the gap in order for the arrester to limit the current. The electrodes are charged with a high voltage, which is usually more than the voltage of the power supply. When the voltage exceeds a certain threshold, current will flow through the gap, resulting in a spark and an increase in the voltage gradient. When the current reaches a certain level, the arrester will limit the current.

The 2036-25-SM-RP gas gap arrester is designed to limit the amplitude of a transient. It achieves this by allowing a portion of the energy associated with the transient to be dissipated in the form of heat. The dissipated energy is proportional to the current flowing through the arrester. The higher the current, the greater the amount of energy will be dissipated. Additionally, the 2036-25-SM-RP arrester can limit the duration of a transient by allowing a portion of the energy to be stored in the device.

The 2036-25-SM-RP gas gap arrester provides protection to various types of equipment by limiting the current associated with transient voltages. It can protect a wide range of equipment, such as systems with inductive loads and long lines, from sudden and hazardous discharges of current. It is an ideal choice for applications in industrial environments, such as substations and other facilities, where lightning and other electrical disturbances are common. The 2036-25-SM-RP arrester provides reliable protection in a variety of conditions, making it a popular choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference