B88069X9960B102

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube (GDT) Arresters are type of surge protective device used to protect electrical equipment by limiting the voltage on lightning or high-energy surges. They are essential components in any electrical system. The advantages of GDT arrests include reduced noise, minimized secondary damage, active current sharing, and no need for re-wiring.

B88069X9960B102 is a type of Gas Discharge Tube Arrester. It is ideal for protecting fault current- sensitive applications, including telecommunications installations, radio and television receivers, domestic and commercial application systems. It is capable of withstanding up to 10 KV of impulse voltage and providing effective protection from transient surges. The device can be used for both primary and secondary protection of electrical systems.

B88069X9960B102 is an AC/DC rated surge arrester. This product has a maximum voltage rating of 8.8 kV and a continuous operating voltage of 690V. It is designed for short circuit current rating of 24 KA. It features an insulation resistance of >1000 MΩ. It also has a dielectric withstand voltage of 1000 V RMS.

The working principle of B88069X9960B102 Gas Discharge Tube Arrester is based on the principle of limiting the current and voltage applied to the protected equipment by breaking down (discharging) the voltage before it reaches the equipment. The arrester is used to divert excessive current away from the protected equipment to ground during a lightning strike and other sudden electrical disturbances. When a surge is detected, it is diverted away from the system by a spark gap, reducing the amount of energy that reaches the system and protecting it from damage.

The arrester is designed to divert current away from the protected equipment by providing a low-impedance path to the ground. As the surge passes through the arrester, it is attenuated and dissipated as heat. This prevents it from reaching the system and damaging it. The arrester can also be connected in series with the system so that the excessive current flows directly to ground and is not absorbed by the equipment.

B88069X9960B102 Gas Discharge Tube Arrester is designed to offer reliable protection for domestic and commercial electrical systems. It is suitable for high-energy surge conditions and provides short circuit protection in the event of a fault. It offers a high degree of insulation and is capable of standing up to 10KV of impulse voltage. The arrester is also easy to install and is designed to last for many years with minimal maintenance. It’s a cost effective way to ensure the safety of your electrical systems.

The specific data is subject to PDF, and the above content is for reference