2036-35-SM

Series:	Mini-TRIGARD™ 2036-SM
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Voltage - DC Spark Over (Nom):	350V
Impulse Discharge Current (8/20µs):	10000A (10kA)
Tolerance:	±20%
Number of Poles:	3
Fail Short:	No
Mounting Type:	Surface Mount
Package / Case:	3-SMD Cylinder Square End

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

GDTs, also known as Gas Discharge Tube Arresters, are electrical protection devices used for voltage regulation. They work on the principle of storing and releasing energy. GDTs are used in a variety of applications and industries, such as telecommunications, power transmission, and consumer electronics.GDTs are normally used on the line side of the device, typically in balanced form. GDTs provide protection from over-voltage conditions caused by lightning and switching surges. The tube contains a gas, commonly sulfur hexafluoride, which is stored at a low pressure. When a voltage surge occurs, the gas is ionized, creating a spark or arc across the tube. The arc dissipates the voltage, providing the protection.GDTs are a type of voltage-dependent resistor and are commonly used for telecommunication circuit protection. They are typically constructed as a series of metal pipe sections, each sealed with an insulating material such as silicone rubber. The pipe section contains the gas, and the end of the pipe contains a sealed metal electrode. When a surge occurs, the gas is ionized, creating a spark or arc across the tube and resulting in a voltage drop. This voltage drop limits the voltage across the protected devices.GDTs are usually designed to trip within a specific time range. This time is typically shorter than the time required for the protection to be effective. They are designed to trip later than the time required to protect the device, allowing for a certain amount of time for the device to remain in operation before being protected.GDTs are used for both AC and DC applications. They are typically used in power distribution systems, transmission lines, and networks. GDTs can also be used in load matching, where they are used to adjust the impedance of circuits. GDTs are used for lightning protection by providing a means of limiting the voltage across a device.GDTs are available in a variety of sizes and ratings. It is important to choose the right GDT for the application, as the wrong GDT can cause issues. For example, a GDT that is rated for a voltage that is too high can protect the device but also be the cause of a voltage dip.GDTs are often used in conjunction with additional devices to provide additional protection in an over-voltage condition. One such device is a Transient Voltage Surge Suppressor (TVSS), which is used to limit the voltage present during spikes. The TVSS is installed in parallel with the GDT, and it works by limiting the voltage across the GDT before the spark occurs. This helps ensure that the GDT is not subject to any damage due to an over-voltage condition.GDTs can also be used in conjunction with voltage regulators. Voltage regulators are used to maintain a steady voltage across a device even in the presence of voltage surges. The GDT is connected in series with the device, and it helps to limit the voltage across the device during surges.GDTs can also be used to protect devices from transient over-voltage conditions. This is done by providing an instantaneous noise attenuation due to the spark or arc across the tube. The spark or arc serves to attenuate the over-voltage, limiting the voltage present at the time of the surge and allowing the device to continue functioning.GDTs are an important component of many electrical protection systems. They are an effective solution for protecting devices from over-voltage conditions caused by lightning and switching surges. GDTs can also be used in load matching, lightning protection, and voltage regulation applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description