209SURSYGW/S530-A3/R2(CY)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LEDs (Light-Emitting Diode) indicators are widely used in various fields, particularity in industrial and commercial applications. The 209SURSYGW/S530-A3/R2(CY), from Schurter Switzerland, is one type of LED indicator. This indicator can be used for a variety of applications where discrete status indication is required. In this article, its application field and working principle are discussed.

Application Field

The 209SURSYGW/S530-A3/R2(CY) LED indicator is designed for use in commercial and industrial machine control applications. It is a single-pole, direct-action, illuminated type with two indicator elements. The height is 12 mm and the diameter is 37.2 mm. It has a high impact-resistant housing that is UL approved up to 2.5 KVAC and can withstand high vibrations in many industrial environments. This LED indicator is rated to withstand a maximum voltage of 250 VAC, a maximum current of 3A, and an operating temperature range from -25°C to 120°C. It is suitable for mounting into 19mm (3/4 inch) panel holes, and designed for IP65 stanard.

Working Principle

The 209SURSYGW/S530-A3/R2(CY) LED indicator is composed of a plastic housing, two LEDs, two resistors, and two terminal clips. The two LEDs are installed in parallel in the housing, with their anode and cathode poles connected to the terminal clips. A resistor is connected in each LED line to limit its current. When voltage is applied to the terminal clips, the LEDs will light up when a threshold voltage is reached. The two LEDs light up at different voltages, providing discrete indication of the state of the system.

Conclusion

The 209SURSYGW/S530-A3/R2(CY) LED indicator is a type of LED indicator designed for commercial and industrial applications to provide discrete status indication. It is characterized by a high impact-resistant housing with a maximum voltage rating of 250 VAC and a maximum current rating of 3A. It is suitable for mounting into 19 mm panel holes and designed to meet the IP65 standard. By connecting two LEDs to the terminal clips, discrete status indication is achieved.

The specific data is subject to PDF, and the above content is for reference