20IMX4-12-8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC Converters, such as the 20IMX4-12-8, are devices used for converting an unregulated DC input voltage to a regulated DC output voltage. The 20IMX4-12-8 is a low noise, high efficiency DC-DC converter. It is designed to operate from a wide input range of 8V to 28V, and can deliver a regulated 12V DC output current up to 4A. It is capable of withstanding short-term overloads up to 2A peak for 10 milliseconds.

The 20IMX4-12-8 is a synchronous buck converter designed with a high switching frequency (typical switch frequency is 300 kHz) to achieve high efficiency with small size inductors and capacitors. The chip achieves low-noise operation due to an internal loop compensation circuit and an integrated power switch. The output voltage can be trimmed from 10-14V with optional external components.

The chip features a soft-start function for protecting the output from inrush current and the input from over-current. An over current protection (OCP) circuit limits the output current at 4A. Slow start and pre-bias start up are also possible with the addition of an external resistor and capacitor. The chip has an enable signal to turn off the output (shutdown mode), and it draws just 10uA in this state.

The 20IMX4-12-8 can operate from an input supply voltage of 8-28V, meaning it can be easily integrated into a wide range of applications. This includes industrial automation, telecommunications, instrumentation, consumer electronics, portable devices, and automotive applications. It can be used in all sorts of electrical circuits to power electronic components, with maximum power handling of up to 48W.

The device works by regulating the output voltage from a DC power supply. When the input voltage changes, an internal oscillator modulates a switching element in the converter to output a new voltage. This switching element is generally a transistor or MOSFET. During normal operation, the oscillator goes on and off at regular intervals, allowing the input voltage to be converted into a regulated output voltage.

To effectively regulate the output voltage, a small amount of energy is lost due to the heat generated by the switching element. This heat is removed via heat sinks so the compound can operate safely in its temperature range. The 20IMX4-12-8 has a maximum junction temperature of 125°C, meaning it can handle even high power applications and maintain a regulated output.

The 20IMX4-12-8 is an efficient, compact, and easy to use high power DC-DC converter. It is designed to operate in a wide input voltage range of 8-28V and can deliver a regulated 12V DC output up to 4A. The chip has built-in features for soft start, over current protection, and low noise operation. It can be used in a variety of industrial, automotive, and consumer applications.

The specific data is subject to PDF, and the above content is for reference