20J4R0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are used in a wide variety of applications, including in the automotive and consumer electronics industries. These resistors have a hole in the middle, which is drilled through the resistor and allows a current to flow through it. The size of the hole determines the amount of resistance the resistor will have. The size of the hole also determines the power the resistor can handle, since the higher the current, the larger the hole needs to be. Generally, the resistors will range in value from a few ohms up to millions of ohms.

In the automotive industry, through hole resistors are often used to reduce the voltage flowing through a circuit, or to measure the amount of current in the circuit. When used to reduce voltage, the size of the hole can be adjusted to the correct value to achieve the desired voltage reduction. In measuring current, the resistor acts as a measuring point through which the current can flow freely without affecting the circuit itself. This allows the current to be measured accurately to be used for tests and troubleshooting.

In consumer electronics, through hole resistors are used to reduce voltage and measure current in a variety of ways, such as in switching power supplies, audio amplifiers, and many other applications. For example, in audio amplifiers, through hole resistors can be used to control the amount of power delivered to the speaker, allowing the sound to be tuned to the desired volume level. In switching power supplies, these resistors can be used to ensure the correct voltage is delivered to the circuit, and also that the current is limited. Without proper voltage and current control, the circuit can become overwhelmed and fail.

The working principle of through hole resistors is based on Ohm’s Law. This law states that the voltage across a resistor is proportional to the current passing through it. The amount of current passing through a resistor is determined by the size of the hole, which can be adjusted to the desired value. The size of the hole will also determine how much power the resistor can handle, since the higher the current, the larger the hole needs to be in order to safely dissipate the power.

In summary, through hole resistors are used in a wide variety of applications in both the automotive and consumer electronics industries. Their working principle is based on Ohm’s Law, and the size of the hole determines the amount of resistance and power the resistor is able to handle. Through proper selection and adjustment of the hole size, a variety of voltage and current requirements can be met accurately and safely.

The specific data is subject to PDF, and the above content is for reference