23J2R0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are an integral part of any electrical circuit. A through hole resistor is basically an electrically conductive material, usually crafted from a ceramic, plastic, metal, or other material, which is then connected to two or more points in the circuit. The resistance of the material is usually determined by its physical size and type. The material is typically measured in Ohms, and the resistance increases and decreases depending on the current that passes through the material. Through hole resistors have several uses including:

Signal Isolation and Control

Through hole resistors are often used in signal isolation circuits to control the signal levels and attenuate them to the desired levels. This is especially important for digital circuits, where signals need to remain within precise parameters for performance reliability. Through hole resistors can be used to reduce the level of any signal, including frequency and waveforms, and they can also be used to separate two signals travelling on the same circuit. This application helps to ensure that the exact levels of each signal are properly isolated from the others.

Power Supplies

Through hole resistors are also widely used in power supply circuits. They are used to regulate the amount of power that a device is receiving. This is especially important for microcontrollers and other sensitive electronic devices since the power supply needs to be kept stable in order to maintain performance reliability. Through hole resistors can be used to reduce the input voltage or current, or to increase the current output, depending on the device. This application helps to ensure that the exact power levels needed by the device are reached.

Pulse Control

Through hole resistors are also used to control the pulse width of pulse-width modulation (PWM) circuits. This is particularly important for motor control applications which require precise pulse-width modulation for smooth operation. Through hole resistors can be used to control the width of the pulses, which helps to reduce the power consumption in the circuit and also improves the efficiency of the control system. In this application, the resistor helps to ensure that the pulses are of the correct width and reach the device in a timely manner.

Dissipation of Heat

Through hole resistors are also used for the dissipation of heat in many electronic components. These components typically generate a large amount of heat during their normal operation, which can cause damage to sensitive electronic components. Through hole resistors help to dissipate this heat away from the vulnerable components and ensure that they remain cool and within their operating parameters.

Noise Reduction

Through hole resistors are also used to reduce the amount of noise in electrical circuits. Noise is created when an electrical signal passes through a conducting material, and it can interfere with the proper functioning of a device. Through hole resistors can be used to reduce the level of noise by dissipating the electrical energy in the circuit and reducing the level of sound generated. This application helps to ensure that the devices in the circuit remain within their proper noise-level parameters.

23J2R0 Application Field and Working Principle

The 23J2R0 is a through hole resistor with the ability to regulate a wide variety of power levels in a circuit. It is often used in power supply circuits, signal isolation circuits, noise reduction circuits, and pulse width modulation circuits. The working principle of the 23J2R0 is based on the ability of the resistor to reduce the amount of current passing through it. The resistance of a resistive material is determined by its physical size and type, and the resistance increases and decreases depending on the amount of current that is passed through it. This enables it to be used to regulate the amount of power a device is receiving and helps to ensure that signals remain within their intended parameters.

The specific data is subject to PDF, and the above content is for reference