23J3K9E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are small electronic components which are placed in printed circuit boards and connected to the components. They are used in a wide variety of electronic devices and circuits and are the most widely used type of resistor in the industry. The term “through hole” refers to their method of assembly, where two soldering points are created in a hole in the printed circuit board, and the lead of the resistor is inserted into the hole and then soldered in place. The 23J3K9E is a type of through hole resistor.

Application Field

The 23J3K9E is used for applications such as decoupling, biasing, load leveling, matching, and current limiters. It is also used in analog-to-digital converters where precise control of signal levels and waveforms is required. It can be used for filtering, rectifying, or adjusting the amplitude of signals. In addition, the 23J3K9E can be used to adjust the timing, phase, and impedance of an oscillator. Overall, this type of through hole resistor is used in a wide variety of applications.

Working Principle

The 23J3K9E is a type of through hole resistor that uses a combination of resistor and capacitor elements to create the desired effect. When the resistor element is used to reduce the current flow, it also reduces the voltage across the resistor. The current flow across the capacitor element creates a voltage drop across the capacitor. The combination of the resistor and capacitor elements create a desired effect which is known as ‘decoupling’. This is achieved because the capacitor element can store a voltage or a charge, while the resistor element can divert the current away from the capacitor element. The combination of these two elements creates a low-impedance path which reduces the amount of electrical noise or interference that can affect the signals.

The 23J3K9E is composed of two metal plates which have different resistances. The plates are connected together by a connecting wire and the resistance of the plates, combined with the connecting wire, forms the overall resistance of the resistor. The wire is connected to a flexible contact so that it can be soldered into the printed circuit board without the use of screws. As the current flows through the resistor, it creates a voltage drop across the plates, and this voltage drop is used to influence the resistance of the resistor. This allows the 23J3K9E to be used in multiple applications, as different voltages will affect the resistance of the resistor.

In addition, the 23J3K9E is also capable of self-correction. This is because if the resistor is exposed to a larger voltage than it is designed to handle, the resistance of the resistor will increase. This increase in resistance will reduce the current flow through the resistor and protect it from damage. On the other hand, if the voltage is lower than the designed voltage, the resistance of the resistor will decrease, allowing for increased current flow.

Conclusion

The 23J3K9E is a type of through hole resistor which is used in a wide variety of applications. It is composed of two plates which are connected by a connecting wire, and the resistance of these plates, combined with the connecting wire, forms the overall resistance of the resistor. Additionally, the 23J3K9E is capable of self-correction, allowing it to be used in applications where precise control of signal levels and waveforms is required. This makes it an ideal choice for many electronic projects and circuits.

The specific data is subject to PDF, and the above content is for reference