23Z104SMNL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes are a type of electrical component consisting of a bundle of insulated wires or cables wound around a magnetic core. The winding makes sure that only the magnetic flux is passed through and not the electrical current, thus preventing any interference or distortion in the signal.

The 23Z104SMNL is a type of common mode choke which is mainly used for reducing the common mode noise in applications where signals have high common mode currents. It is designed to reduce common mode noise between differential data lines, and is based on a self-shielded winding design. This feature allows the choke to have a high inductance value compared to other types of common mode chokes.

The 23Z104SMNL application field covers a wide range of applications from power supplies, telecommunications, automotive and consumer electronics. It is suitable for DC/DC converters, amplifiers, radio amplifiers, motor controls, inverters and other circuitry requiring a reduction of common mode noise in differential line signals. It is also used in the systems where differential driving is necessary in order to improve signal integrity.

The 23Z104SMNL has two main operating parameters: inductance and impedance. The inductance is expressed in micro Henries (μH) and describes the amount of energy stored in the choke, while the impedance is expressed in Ohms (Ω) and defines the amount of resistance the choke will oppose to the current passing through it. The higher the inductance and impedance values, the higher the common mode noise reduction achieved by the choke.

The 23Z104SMNL working principle is to limit relatively low frequency common mode currents by taking advantage of its relatively high impedance at these frequencies. The principle is based on the fact that the impedance level of a common mode choke increases as frequency decreases, whereas the impedance of a normal electric wire decreases as frequency decreases.

The 23Z104SMNL has a maximum current rating of 4.8A and a maximum voltage of 400V. The device dimensions are 7.8mm and 10.0mm for the two mounting holes, and the choke is made of a low-OHMS copper material. It has an operating temperature range of -40°C to +125°C, and has an insulation voltage rating of 1000 V. The device also features a low profile design making it ideal for space constrained applications.

The 23Z104SMNL is a reliable component and is extremely useful when a noise reduction system needs to be put in place. It can be used in a variety of applications and its performance and efficiency make it a top choice for many engineers.

The specific data is subject to PDF, and the above content is for reference