2461-000-X7V0-102PLF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Feed Through Capacitors: 2461-000-X7V0-102PLF

Feed through capacitors, also known as microwave and RF capacitors, are a type of capacitor which performs two functions, separation of two signal lines, and at the same time providing a measure of high frequency conductivity between the two. They are primarily used in the telecommunications industry and in the design of complex analog and digital circuits. The 2461-00-X7V0-102PLF is an example of a feed through capacitor which can be used in a variety of applications.

Applications of the 2461-000-X7V0-102PLF

The 2461-000-X7V0-102PLF is designed to function as an isolation capacitor for separating two signal lines on a single printed wire board (PWB), as well as to block off external conductors on the same board. This makes them an ideal choice for a variety of applications, including those involving high-frequency analog signals in communications systems, such as circuit board interconnects, cable TV amplifiers, power distribution, and antenna systems.

In addition, the 2461-000-X7V0-102PLF is also used in the design of power amplifier modules, where it provides a measure of high-frequency conductivity between two power supply connections, providing isolation for each of the power amplifiers. Furthermore, the capacitor is also used in automotive audio systems, to provide DC rejection and noise suppression for audio signals.

Working Principle of the 2461-000-X7V0-102PLF

The working principle of the 2461-000-X7V0-102PLF is based on capacitive reactance. When a voltage is applied across the capacitor plates, a small amount of current flows through the device, forming what is known as a “capacitive divider”. This means that the voltage applied across the device is divided between the two capacitor plates, with the ratio of the two voltages depending on the capacitance of the device. The resulting separation between the two signal lines is known as DC voltage isolation.

In addition, the 2461-000-X7V0-102PLF also has the capability to reject high-frequency noise interference from external sources. This is achieved through the use of what is known as a “high-frequency bypass”, which is a circuit which is designed to absorb and dissipate any high frequency signals that are not required. This helps to ensure that the low level analog signals passing through the capacitor remain unaffected by any external interference.

Finally, the 2461-000-X7V0-102PLF also provides a measure of high-frequency conductivity between the two signal lines, which helps to minimize signal degradation due to rapid changes in signal frequencies. This helps to ensure that the signal is transmitted with minimal attenuation over the entire line.

Conclusion

The 2461-000-X7V0-102PLF is a high quality feed through capacitor, which is designed to provide DC voltage isolation and high-frequency bypass for communications systems, power amplifiers, and other analog signal applications. Its principal function is to provide a measure of high-frequency conductivity between two signal lines, blocking off any external interference while allowing high-quality signals to pass through with minimal attenuation.

The specific data is subject to PDF, and the above content is for reference