24AA025T-I/SN

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 24AA025T-I/SN is a two-wire serial EEPROM memory device. It is a low-power, low-voltage, serial CMOS EEPROM. This device contains 256 bits of serial electrically erasable and programmable read only memory (EEPROM) organized as 16 bytes of data. It is optimized for use in many industrial and commercial applications where low-power and low-voltage operations are essential. The 24AA025T-I/SN is offered in an 8-pin PDIP and is available in the commercial (0°C to +70°C) temperature range.

The 24AA025T-I/SN is designed to interface directly with microcontrollers which support the two-wire serial interface. The two-wire bus consists of a serial data line (SDA) and a serial clock line (SCL). Communication between microcontroller and the 24AA025T-I/SN is achieved by using a set of special commands. Data can be read from or written to the 24AA025T-I/SN. The clock signal (SCL) is generated by the microcontroller. The 24AA025T-I/SN device can operate in both standard (100 kHz) and fast mode (400 kHz).

The 24AA025T-I/SN device incorporates the two-wire serial interface protocol. The protocol allows up to eight devices to communicate on the same bus. A driver device transmits the serial data on the bus, while a slave device receives the serial data. Data is transferred one bit at a time, in a sequential manner. The data is encoded using 8-bit frames. The contents of the 8-bit frame is transferred to the next slave device after each clock pulse (SCL). The 24AA025T-I/SN device operates with a master clock frequency up to 400 KHz.

The 24AA025T-I/SN is a serial non-volatile EEPROM that has an 8-bit Instruction Register. The device accepts one of four instructions for reading, writing, or advancing the address pointer of the memory device. The 24AA025T-I/SN operates at 2.45V operating voltage and has an absolute maximum operating temperature rating of 70°C. The device also features a low-power standby mode that reduces the quiescent current to 10µA.

The 24AA025T-I/SN is ideal for applications such as serial communications, factory automation, consumer appliances, industrial control, data acquisition and security, automotive, and medical systems. Its burst mode operation enables fast, simultaneous data read/write to multiple devices, making it well-suited for use in systems requiring multi-node communications. The ability to write and erase capabilities, making it ideal for applications requiring frequent data updates.

In conclusion, the 24AA025T-I/SN is a two-wire serial EEPROM memory device. It is ideal for applications such as serial communications, factory automation, consumer appliances, industrial control, data acquisition and security, automotive, and medical systems. It has an 8-bit instruction register and can communicate on the same bus with up to eight devices. Its low-power operation makes it suitable for applications where power constraints are important. Its burst mode operation enables fast, simultaneous data read/write to multiple devices and it has write and erase capabilities, making it ideal for applications requiring frequent data updates.

The specific data is subject to PDF, and the above content is for reference