24AA04T-I/ST

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 24AA04T-I/ST is a popular memory device used in many different applications. It is a 4-Kbit Serial EEPROM, meaning that it can store up to 4-Kbits, or 512 bytes, of data in a form that can be read and written to by a microcontroller or other host device. It is often used for storing configuration data and other non-volatile information, as it retains its contents through power cycles. It is also useful for applications that require a non-volatile memory device with a small size and low cost.

The 24AA04T-I/ST has a wide range of applications. One of the most common uses is in medical devices, where the device is used for storing calibration data and other information about the device. It is also often used in industrial applications, such as temperature or motion controllers, security systems, and wireless applications. It is also used in some consumer electronics, such as digital cameras and MP3 players.

The 24AA04T-I/ST is easy to use and can be interfaced with most microcontrollers. The device uses a simple two-wire bus known as I2C to communicate with the host device. The two wires on the bus are SCL (serial clock) and SDA (serial data). The device has 32 address bits, allowing up to 32 of these devices to be connected to a single I2C bus. The device also has a hardware write-protect feature for preventing accidental writes to its memory.

The basic operating principle of the 24AA04T-I/ST is simple. It has two primary operations: read and write. In a read operation, the host device sends a one-byte command to the device, which is followed by an address. The device then responds with the data at that address. In a write operation, the host device sends a two-byte command, followed by an address and the data to write. The device then stores the data at the specified address.

In addition to these two primary operations, the 24AA04T-I/ST also has other features. It has an automatic address incrementer, allowing it to automatically increment its address pointer for successive reads and writes. It also has an on-chip 4-Kbit write buffer, allowing it to store up to 4 of the most recently written bytes in memory. Finally, it has a write protect feature, allowing the device to be write-protected to prevent accidental writes.

The 24AA04T-I/ST is a popular memory device that is used in many different applications. It is easy to use and can be interfaced with most microcontrollers. Its features, such as an automatic address incrementer, on-chip 4-Kbit write buffer, and write-protect feature make it suitable for applications that require a non-volatile memory device with a small size and low cost.

The specific data is subject to PDF, and the above content is for reference