24AA1025-I/SM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory is a fundamental component of all digital systems, and the 24AA1025-I/SM is a specialized and highly advanced form of memory. It is an 8-lead, 1.65 to 5.5V, 1Mb I2C serial EEPROM memory device with two different address spaces. It is typically used in embedded systems, industrial control systems, telecommunications, and medical equipment.

The 24AA1025-I/SM offers a write cycle time of 5 ms and can be written, erased and read byte by byte. It has an extended temperature range of -40°C to +85°C, which makes it suitable for use in industrial applications. The device also includes several safety features such as write protection, low voltage or over-voltage protection, and active high write enable.

The 24AA1025-I/SM is composed of four internally organized 1Kb blocks with 8-bit address and control logic. A single I2C bus is used to write and read data from the device. Data is stored in a block structure which is divided into four internal registers, each containing 256 bytes of memory. The device also supports an addressable memory window which allows a user to access up to 2K bytes of memory with a single write or read operation.

The 24AA1025-I/SM features two different addressing modes. The first is a random control mode where data can be read and written on a byte-by-byte basis. This mode is suitable for applications requiring frequent write operations and does not need erase cycles. The second addressing mode is the page mode which allows data to be written byte-by-byte but reads are done page by page. This mode requires erase cycles when writing new data and is more suitable for applications requiring large amounts of data transfer.

The 24AA1025-I/SM contains a user-programmable protection register which enables write protection of both the random control and page address modes. The device also contains a write enable latch. When set, this latch enables writes to the device and can be set through a simple command on the I2C bus. The device also includes a write inhibit feature which can be programmed to prohibit writes to specified locations in the array.

The 24AA1025-I/SM is a specialized and highly advanced form of memory. It provides high performance, reliability, and safety features that make it suitable for use in a wide variety of embedded applications. It is an ideal choice for those applications requiring access to large amounts of data in a short amount of time.

The specific data is subject to PDF, and the above content is for reference