24AA16HT-I/MS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

24AA16HT-I/MS is a 16Kb EEPROM with a form factor or operating voltage, which gives it both good compatibility and reliable operation levels. The device is rated for supply voltages of 2.7 V to 5.5V and operates over an extended range from -40 °C to +85 °C. It is typically used in data and parameter storage, identification, and configuration memory applications.

The 24AA16HT-I/MS utilizes an I²C or two-wire serial interface to communication. The I²C interface supports a standard mode of100 kHz, a Fast-mode of 400 kHz, and a Fast-mode plus of 1 Mbps. The device typically communicates in the Fast-mode at 400 kHz.

The 24AA16HT-I/MS has a typical read time of 5 ms and a typical write time of 5 ms. It has eight memory pages of 16 bytes each, for a total memory density of 128 bytes. It uses a two-wire serial interface for communication, and supports a serial command set which provides an easy method for the user to rapidly access the device’s memory. The typical power consumption at 1.8V is 400 μA.

The main features of the 24AA16HT-I/MS are its ability to reliably store data, high performance in a small form factor, and low power consumption. The device has been designed to withstand extreme temperatures, such as temperatures created during soldering, as well as relatively high voltage and other electrical surges.

The working principle of the 24AA16HT-I/MS is based on a write-protected memory block that stores user-programmed data. The chip can be written to and read from in many ways, including a simple I²C interface. Data is written to the device in blocks of 16 bytes, and is read from the device one byte at a time. The device also has a 16-bit address counter, which keeps track of the current address.

The 24AA16HT-I/MS offers robust protection against data corruption and accidental writes, making it ideal for applications that require reliable data storage. All operations happen over the I²C bus, making the device easy to integrate into any system. The user can use the device for a variety of tasks, including configuration, storage, identification and parameter storage. The 24AA16HT-I/MS is an ideal choice for applications that require reliable data storage in a small form factor.

The specific data is subject to PDF, and the above content is for reference